
2008-2009 Chrysler Aspen 4.7L V8/5.7L V8 | Fuel Pump Assembly | OE#68027993AC/P76537M - PHILTOP
Carbon Commutator
Precision Ceramic Resistor
Seal Included
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 7460FUP3276US
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2008 - 2009 | 2008 - 2009 | 2008 | 2008 | 2008 - 2009 | 2008 - 2009 | 2009 | 2009 | 2009 | 2008 - 2009 | 2008 - 2009 | 2008 - 2009 | 2008 | 2008 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Make | Chrysler | Chrysler | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge |
| Model | Aspen | Aspen | Durango | Durango | Durango | Durango | Durango | Durango | Durango | Durango | Durango | Durango | Durango | Durango |
| Trim | Limited | Limited | Adventurer | Adventurer | Limited | Limited | SE | SE | SE | SLT | SLT | SLT | SXT | SXT |
| Engine | 4.7L V8 | 5.7L V8 | 4.7L V8 | 5.7L V8 | 4.7L V8 | 5.7L V8 | 3.7L V6 | 4.7L V8 | 5.7L V8 | 3.7L V6 | 4.7L V8 | 5.7L V8 | 3.7L V6 | 4.7L V8 |
| Note | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
- Check fuel pressure before confirming that the pump requires replacement.
- Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
- Work in a well-ventilated area away from flames, sparks and smoking.
- Relieve fuel-system pressure and disconnect the negative battery cable.
- Confirm that a new fuel-pump sealing ring is available.
Installation Steps
- Step-1: Relieve fuel pressure and clean the area around the tank opening.
- Step-2: Label and disconnect the fuel lines and electrical connector.
- Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
- Step-4: Carefully lift out the old module without damaging the float arm.
- Step-5: Discard the old sealing ring and install a new one.
- Step-6: Install the new module in the correct orientation and secure the retaining ring.
- Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.
After Installation
- Cycle the ignition ON two or three times without starting to prime the fuel system.
- Start the engine and inspect every connection for leakage or fuel odor.
- Verify fuel pressure and fuel-gauge operation.
- Stop the engine immediately if a leak or strong gasoline odor is detected.
- Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2008-2009 Chrysler Aspen 4.7L V8/5.7L V8 | Fuel Pump Assembly | OE#68027993AC/P76537M - PHILTOP
Carbon Commutator
Precision Ceramic Resistor
Seal Included
- SKU:
- 7460FUP3276US
$73.82
Check if this fits your vehicle
Select a vehicle to check this product.
- Gasket or Seal Included
- Yes
- Pressure Sensor Included
- No
- Strainer Included
- Yes
- Fuel Level Sender Assembly Included
- Yes
- Resistance Ohms Empty
- 220.0 Ω
- Resistance Ohms Full
- 20.0 Ω
- Average Flow Rating
- 26 GPH
- In Tank or External
- In Tank
- (Vehicle Fitment) Compatible with Ford F-150 1990–1996 (4.9L, 5.0L, 5.8L), F-250 1990–1996 (4.9L, 5.8L, 7.5L), F-250 HD 1997 (5.8L, 7.5L), and F-350 1990–1997 (4.9L, 5.8L, 7.5L). Engineered for a direct OE fit and reliable performance
- (OEM Replacement) Replaces OEM part numbers: FG0199, E2064M, F6TZ-9A407-CA, F6TZ-9A407-CC, F4TZ-9A407-C, F4TZ-9A407-R, F0TZ-9A407-CA, FG0198, SP2007H, PFB-3, TU200, TU201, P74108. Meets or exceeds OE specifications
- (Complete Assembly) This fuel pump module includes the fuel pump, sending unit, pressure sensor, float, and tank seal. Pre-assembled and ready for plug-and-play installation—no additional parts required
- (Durable & Reliable) Built with high-performance POM plastic and corrosion-resistant materials. Designed for ethanol resistance and tested for over 3,500 hours of operation with less than 15% flow decay—ensuring long-lasting durability
- (Easy Installation) No special tools needed. Please verify your vehicle’s year, make, and model before purchasing. Use the fitment guide on the product detail page or the “Suncentauto Confirmed Fit” tool to ensure proper compatibility
0.0
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2008 - 2009 | Chrysler | Aspen | Limited | 4.7L V8 | - |
| 2008 - 2009 | Chrysler | Aspen | Limited | 5.7L V8 | - |
| 2008 | Dodge | Durango | Adventurer | 4.7L V8 | - |
| 2008 | Dodge | Durango | Adventurer | 5.7L V8 | - |
| 2008 - 2009 | Dodge | Durango | Limited | 4.7L V8 | - |
| 2008 - 2009 | Dodge | Durango | Limited | 5.7L V8 | - |
| 2009 | Dodge | Durango | SE | 3.7L V6 | - |
| 2009 | Dodge | Durango | SE | 4.7L V8 | - |
| 2009 | Dodge | Durango | SE | 5.7L V8 | - |
| 2008 - 2009 | Dodge | Durango | SLT | 3.7L V6 | - |
| 2008 - 2009 | Dodge | Durango | SLT | 4.7L V8 | - |
| 2008 - 2009 | Dodge | Durango | SLT | 5.7L V8 | - |
| 2008 | Dodge | Durango | SXT | 3.7L V6 | - |
| 2008 | Dodge | Durango | SXT | 4.7L V8 | - |
Product Specifications
- Brand
- PHILTOP
- Gasket or Seal Included
- Yes
- Pressure Sensor Included
- No
- Strainer Included
- Yes
- Fuel Level Sender Assembly Included
- Yes
- Resistance Ohms Empty
- 220.0 Ω
- Resistance Ohms Full
- 20.0 Ω
- Average Flow Rating
- 26 GPH
- In Tank or External
- In Tank
- Lock Ring Included
- No
- Material
- Metal, Plastic
- Maximum Pressure
- 80.0 PSI
- Outlet Outside Diameter
- 0.375 in
- Outlet Quantity
- 1
- Outlet Type
- Quick Connect
- Pump Structure
- Turbine Impeller
- Items Included
- 1x Fuel Pump Assembly - FG1332
- Warranty Period
- 2-Year
- OE Number
- 68027993AC,68027993AD,68027993AB,68027993AA,68027988AB,68027988AA,68027988AC,RL027988AC,68027988AD
- Part Number
- P76537M,SP7098M,FG1332,USEP7234M
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
- Check fuel pressure before confirming that the pump requires replacement.
- Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
- Work in a well-ventilated area away from flames, sparks and smoking.
- Relieve fuel-system pressure and disconnect the negative battery cable.
- Confirm that a new fuel-pump sealing ring is available.
Installation Steps
- Step-1: Relieve fuel pressure and clean the area around the tank opening.
- Step-2: Label and disconnect the fuel lines and electrical connector.
- Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
- Step-4: Carefully lift out the old module without damaging the float arm.
- Step-5: Discard the old sealing ring and install a new one.
- Step-6: Install the new module in the correct orientation and secure the retaining ring.
- Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.
After Installation
- Cycle the ignition ON two or three times without starting to prime the fuel system.
- Start the engine and inspect every connection for leakage or fuel odor.
- Verify fuel pressure and fuel-gauge operation.
- Stop the engine immediately if a leak or strong gasoline odor is detected.
- Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.