1999-2000 Honda Civic 1.6L L4 | Front Driver Side & Passenger Side CV Axle Shaft | 664121 - PHILTOP

1999-2000 Honda Civic 1.6L L4 | Front Driver Side & Passenger Side CV Axle Shaft | 664121 - PHILTOP

Front

Built to Last

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
95ISSHA7757US

Specifications

Brand
PHILTOP
Position
Front
ABS Ring Included
Yes
Quantity
2
Input Shaft Spline Count
27
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
26
Items Included
1x Front Cv Axle Shaft - 664063 1x Front Cv Axle Shaft - 664121
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
664121,664063

Highlights

  • Fitment: Front Axle Shaft for 1994-2001 Integra, 1999-2000 Civic Si, 1994 Civic del Sol 1.6L, 1995-1997 Civic del Sol VTEC.
  • Reference Number: 44010S04J51, 44010S04J01, 44010SK7J13, 44010SK7J22, 664063, 44010ST7J72, 44010ST7N50, 44010ST7N00, 44010ST7950, 44010ST7J50, 44010ST7J61, 44010SK7J82, 44010SK7J73, 44305S04J60, 44010ST7J60, 44305S03950, 44305ST7A50, 44010ST7R51, 44010SK7J72, 44305S04J10, 44010ST7R50, 44011ST7950, 44011S04J51, 44011ST7J50, 44011ST7J61, 44011S04J01, 44011ST7J60, 664121, 44011ST7N50, 44306S04J60, 44306ST7A50, 44011ST7N00, 44306S03950, 44305S6EE50, 44306S04J10, 44305S5TA50, 44011ST7R51, 44011ST7J72.
  • Reliably: Enjoy a smoother, more reliable ride with our high-quality CV axles. The high quality materials and excellent performance of our half shafts provide reliable support for your vehicle!
  • High Quality: Half shafts are 100% ground to improve ball path and surface finish and extend product life.CV shafts are normalised to ensure stability in subsequent machining.
  • Function: Half shafts for equal speed power transmission and wheel steering through pendulum angle.CV axles are designed in strict accordance with OE standards, with 100% inspection of key mating dimensions.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1997 - 20011994 - 20011994 - 20011994 - 19981995 - 19961997 - 19982000 - 20011999 - 200019941994 - 1997
MakeAcuraAcuraAcuraAcuraAcuraAcuraAcuraHondaHondaHonda
ModelIntegraIntegraIntegraIntegraIntegraIntegraIntegraCivicCivic del SolCivic del Sol
TrimGSGS-RLSRSSpecial EditionType RType RSiSiVTEC
Engine1.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.6L L41.6L L41.6L L4
Note----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

DaveTheMechanic_357

11/18/2025

The finish on this axle is really nice. For the price point, the quality is outstanding. It’s a noticeable upgrade from the worn-out part and a steal for the cost.

Mike from Texas_418

01/05/2026

Came packaged really well and got here sooner than I thought. Had a quick question and customer service answered right away. Very satisfied with the whole experience.

FAQS

No FAQs have been added for this product yet.