2007-2022 Dodge Charger 3.6L V6/5.7L V8/2.7L V6/3.5L V6 | Front Drive Shaft | 936400 - PHILTOP

2007-2022 Dodge Charger 3.6L V6/5.7L V8/2.7L V6/3.5L V6 | Front Drive Shaft | 936400 - PHILTOP

Front

Factory-Balanced

Corrosion-Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
17ISDSA0467US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Front
Fully Extended Length
27.83 in/707 mm
Fully Compressed Length
24.49 in/622 mm
Shaft Diameter
Φ51
Items Included
1x Drive Shaft - 936400
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
No
Adjustable Length
Yes
Tube Wall Thickness
0.12 in/3 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936400

Highlights

  • (Vehicle Fitments)Fits for Dodge 2007-2022 Charger AWD, 2017-2022 Challenger AWD, 2005-2008 Magnum AWD, for Chrysler 2005-2022 300 AWD
  • (Specifications)①Installation Position: Front Side; ②Extended Shaft Length: 27.83 inch; ③Compressed Shaft Length: 24.48 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ51; ⑥Shaft Wall Thickness: 0.118 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)936400,68200149AA,68200149AE,4593542AB,68200149AD,68200149AC,68200149AB
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Precise Vehicle Fitment) Each drive shaft receives high-speed dynamic balancing prior to shipment. This step helps minimize vibration during operation and supports more uniform wear across drivetrain components

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20142013 - 20172005 - 20182013 - 20142012 - 20142015 - 20172015 - 20172005 - 201020122015 - 202020102012 - 202020102012 - 2020200920102005 - 20102018 - 20222018 - 20222017 - 20222019 - 202220182020 - 202220182014 - 20222014 - 20222007 - 20142007 - 20102007 - 20102013 - 20172008 - 201020132007 - 20102012 - 20172019 - 202220122005 - 2008200720072005 - 2008
MakeChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
Model300300300300300300300300300300300300300300300300300300300ChallengerChallengerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerMagnumMagnumMagnumMagnum
TrimBaseCCC LuxuryC LuxuryC PlatinumC PlatinumLimitedLimitedLimitedSSSSSignature SeriesTouringTouringTouringTouring LGTSXTGTGTGT PlusPursuitPursuitR/TSESESESESESXTSXTSXTSXT PlusR/TSESESXT
Engine3.6L V63.6L V65.7L V83.6L V65.7L V83.6L V65.7L V83.5L V63.6L V63.6L V63.5L V63.6L V65.7L V85.7L V83.5L V62.7L V63.5L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V65.7L V85.7L V82.7L V63.5L V63.6L V65.7L V85.7L V83.5L V63.6L V63.6L V63.6L V65.7L V82.7L V63.5L V63.5L V6
Note----------------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Keith McDonald

10/01/2026

Verified buyer

Fit exactly as should and was smooth when 4x4 was engaged. Best advice is to get the demonstration part # before you order there are a lot of variables.

Tom_Handy_238

12/21/2025

Super fast shipping, got here in just a couple days. Everything was packaged really well. I had a question about the install and customer service was incredibly helpful and friendly. Great experience.

FAQS

No FAQs have been added for this product yet.