2004-2008 Ford F-150 5.4L V8/4.2L V6/4.6L V8 | Front Drive Shaft | 938076 - PHILTOP

2004-2008 Ford F-150 5.4L V8/4.2L V6/4.6L V8 | Front Drive Shaft | 938076 - PHILTOP

Front

Factory-Balanced

Corrosion-Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
29ISDSA0927US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Front
Fully Extended Length
39.17 in/995 mm
Fully Compressed Length
35.83 in/910 mm
Shaft Diameter
Φ51
Items Included
1x Drive Shaft - 938076
Surface Finish
Painted
Flange Shape
Square
Bolt Hole Quantity
4
Two-Piece Design
No
Adjustable Length
Yes
Tube Wall Thickness
0.12 in/3 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
938076

Highlights

  • (Vehicle Fitments)Fits for Ford 2004 F-150 4WD(New Body Style), 2005-2008 F-150 4WD, 2003-2006 Expedition 4WD,for Lincoln 2006-2008 Mark LT 4WD
  • (Specifications)①Installation Position: Front Side; ②Extended Shaft Length: 39.17 inch; ③Compressed Shaft Length: 35.82 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ51; ⑥Shaft Wall Thickness: 0.118 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)938076,5L3Z4A376A,2L1Z4A376AA
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Square Shape; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (End-to-End Quality Control) Every step of production—from incoming materials to outbound shipping—undergoes rigorous inspection. This helps maintain consistency with OEM requirements across all finished shafts

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 20042003 - 200620062005 - 20062004200420042005 - 20062003 - 20042003 - 200620042004200620042005 - 20082006 - 20082005 - 200820042005 - 20082005 - 200820042005 - 2008200820082005 - 200820042005 - 200820042005 - 20082005 - 200820042005 - 200820042005 - 20082006 - 2008
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordLincoln
ModelExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150Mark LT
TrimEddie BauerEddie BauerKing RanchLimitedNBXNBXXLSXLSXLTXLTXLT SportXLT SportXLT SportFX4FX4Harley-Davidson EditionKing RanchLariatLariatSTXSTXSTXTHE 60TH ANNIVERSARY EDITIONTHE 60TH ANNIVERSARY EDITIONXLXLXLXLXLXLTXLTXLTXLTXLTBase
Engine4.6L V85.4L V85.4L V85.4L V84.6L V85.4L V84.6L V85.4L V84.6L V85.4L V84.6L V85.4L V85.4L V85.4L V85.4L V85.4L V85.4L V85.4L V85.4L V84.2L V64.6L V84.6L V84.6L V85.4L V84.2L V64.6L V84.6L V85.4L V85.4L V84.2L V64.6L V84.6L V85.4L V85.4L V85.4L V8
Note-------------
New Body Style
---
New Body Style
--
New Body Style
----
New Body Style
-
New Body Style
--
New Body Style
-
New Body Style
--

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

SarahDrives_258

01/23/2026

Got here fast and was packed really well. No damage at all. Customer service was great when I called to confirm shipping times. Happy with the whole process.

DaveTheMechanic_597

05/12/2026

I was anticipating a tough install, but this front drive shaft was surprisingly simple to put in. It lined up perfectly with all the mounting points. Way better than the one I replaced.

FAQS

No FAQs have been added for this product yet.