2015-2017 Ford Expedition 3.5L V6 | Front Drive Shaft | 938818 - PHILTOP

2015-2017 Ford Expedition 3.5L V6 | Front Drive Shaft | 938818 - PHILTOP

Front

Factory-Balanced

Corrosion-Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
38ISDSA1387US

Specifications

Brand
PHILTOP
Mounting Type
Cv Joint to Cv Joint
Position
Front
Fully Extended Length
32.76 in/832 mm
Fully Compressed Length
30.71 in/780 mm
Shaft Diameter
Φ51
Items Included
1x Drive Shaft - 938818
Surface Finish
Painted
Two-Piece Design
No
Adjustable Length
Yes
Tube Wall Thickness
0.12 in/3 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
938818

Highlights

  • (Vehicle Fitments)Fits Ford 2011-2017 F-150 2.7/3.5/3.7L 4WD, 2015-2017 Expedition 4WD,for Lincoln 2015-2017 Navigator 4WD
  • (Specifications)①Installation Position: Front Side; ②Extended Shaft Length: 32.76 inch; ③Compressed Shaft Length: 30.71 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ51; ⑥Shaft Wall Thickness: 0.118 inch; ⑦Length is measured end to end across the entire driveshaft
  • (Reference Number)938818,BL3Z4A376B,BL3Z4A376A,FL3Z4A376A
  • (Attention)①Mounting Type: Ball Cage + Ball Cage; ②Adjustable Length for Custom Fit; ③Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Professional Protective Packaging) Multi-layer protection is built into the packaging to help lessen impact forces and reduce the risk of deformation during shipping

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2015 - 20172015 - 20172015 - 20172016 - 20172015 - 20172015 - 20172015 - 20172015 - 20172015 - 20172016 - 20172015 - 20172015 - 20172011 - 20142011 - 20172015 - 20172011 - 20172013 - 20142016 - 20172011 - 201720172016 - 20172011 - 20142015 - 20172011 - 20172011 - 20142015 - 20172011 - 20172011 - 2014201520152016 - 20172016 - 20172016 - 20172016 - 2017
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordLincolnLincolnLincolnLincolnLincolnLincoln
ModelExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionExpeditionF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150NavigatorNavigatorNavigatorNavigatorNavigatorNavigator
TrimEL King RanchEL LimitedEL PlatinumEL SSVEL XLEL XLTKing RanchLimitedPlatinumSSVXLXLTFX4King RanchLariatLariatLimitedLimitedPlatinumRaptorSSVSTXXLXLXLXLTXLTXLTBaseLL ReserveL SelectReserveSelect
Engine3.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V62.7L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.7L V62.7L V63.5L V63.7L V62.7L V63.5L V63.7L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V6
Note----------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Nancy_FirstCar_39

06/19/2026

Was a bit worried about installing this myself, but it went on smoother than I expected. The fit was spot on, no wrestling with it. Way easier than the last drive shaft I bought for a different truck.

Mike from Texas_524

06/18/2026

Man, they really know how to pack stuff right. Everything arrived in perfect condition, no dings or scratches. And it got here way faster than I thought it would. Plus, when I had a quick question, the customer service folks were super helpful and friendly.

FAQS

No FAQs have been added for this product yet.