2011-2016 Ford F-250 Super Duty 6.2L/6.7L | Front Drive Shaft | 938304 - PHILTOP

2011-2016 Ford F-250 Super Duty 6.2L/6.7L | Front Drive Shaft | 938304 - PHILTOP

Front

Factory-Balanced

Corrosion-Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
98ISDSA1307US

Specifications

Brand
PHILTOP
Mounting Type
Flange Mount
Position
Front
Fully Extended Length
39.69 in/1008 mm
Fully Compressed Length
38.5 in/978 mm
Shaft Diameter
Φ70
Items Included
1x Drive Shaft - 938304
Surface Finish
Painted
Flange Shape
Round
Bolt Hole Quantity
4
Two-Piece Design
No
Universal Joint Size
φ30.18*92
Adjustable Length
Yes
Tube Wall Thickness
0.07 in/1.8 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
938304

Highlights

  • (Vehicle Fitments)Fits Ford 2011-2016 F-250/F-350 Super Duty 4WD, 2011-2016 F-450/F-550 Super Duty 6.7L 4 X 4
  • (Specifications)①Installation Position: Front Side; ②Extended Shaft Length: 39.69 inch; ③Compressed Shaft Length: 38.5 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ70; ⑥Shaft Wall Thickness: 0.071 inch; ⑦U-Joint Size: φ30.18*92; ⑧Length is measured end to end across the entire driveshaft.
  • (Reference Number)938304,BC3Z4A376A
  • (Attention)①Mounting Type: Flange mounting; ②Flange Type: Round Shape; ③Adjustable Length for Custom Fit; ④Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (High-Performance High-Temperature Grease) Premium lithium-based grease is selected to maintain stable lubrication performance under extreme temperatures, effectively reducing friction loss between metal components

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2011 - 20162011 - 20162011 - 20162011 - 20162013 - 20162013 - 20162011 - 20162011 - 20162011 - 20162011 - 20162011 - 20162011 - 20162011 - 20162011 - 20162013 - 20162013 - 20162011 - 20162011 - 20162011 - 20162011 - 20162011 - 20162011 - 20162013 - 20162011 - 20162011 - 20162011 - 20162011 - 20162011 - 2016
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelF-250 Super DutyF-250 Super DutyF-250 Super DutyF-250 Super DutyF-250 Super DutyF-250 Super DutyF-250 Super DutyF-250 Super DutyF-250 Super DutyF-250 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-450 Super DutyF-450 Super DutyF-450 Super DutyF-450 Super DutyF-450 Super DutyF-550 Super DutyF-550 Super DutyF-550 Super Duty
TrimKing RanchKing RanchLariatLariatPlatinumPlatinumXLXLXLTXLTKing RanchKing RanchLariatLariatPlatinumPlatinumXLXLXLTXLTKing RanchLariatPlatinumXLXLTLariatXLXLT
Engine6.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.2L V86.7L V86.7L V86.7L V86.7L V86.7L V86.7L V86.7L V86.7L V86.7L V8
Note----------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.5/5

Based on 8 reviews

563%
425%
313%
20%
10%

Robert

09/20/2026

Verified buyer

Product seems to be good. Seems like everything is as it should be. Will post more when used a while!

Jennifer_Auto_736

03/11/2026

Super fast shipping, got here faster than I thought it would. Everything was packed really well. Customer service was super helpful with a quick question I had.

FAQS

No FAQs have been added for this product yet.