1998-2010 Ford Ranger 3.0L V6/4.0L V6 | Front Drive Shaft | 936813 - PHILTOP

1998-2010 Ford Ranger 3.0L V6/4.0L V6 | Front Drive Shaft | 936813 - PHILTOP

Front

Factory-Balanced

Corrosion-Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
75ISDSA0717US

Specifications

Brand
PHILTOP
Mounting Type
Cv Joint + U-Joint
Position
Front
Fully Extended Length
31.93 in/811 mm
Fully Compressed Length
29.88 in/759 mm
Shaft Diameter
Φ51
Items Included
1x Drive Shaft - 936813
Surface Finish
Painted
Two-Piece Design
No
Universal Joint Size
Φ27*81.8
Adjustable Length
Yes
Tube Wall Thickness
0.12 in/3 mm
Shaft Material
Steel
Warranty Period
2-Year
Part Number
936813

Highlights

  • (Vehicle Fitments)Fits for Ford 1998-1999 Ranger 3.0/4.0L 4WD, 1998-1999 Ranger 2.5L 4WD, 2000-2001 Ranger 3.0/4.0L 4WD, 2000-2001 Ranger 3.0L 4WD,2000-2002 Ranger 4.0L 4WD 2002-2002 Ranger 3.0/4.0L 4WD, 2003-2010 Ranger 4WD, 1997-2001 Explorer 4.0L 4WD/AWD 4doors, 2001-2005 Explorer Sport Trac 4WD,for Mazda 1998-2009 B4000 4WD, 1998-2002 B3000 4WD,for Mercury 1998-1999 Mountaineer 4.0L AWD, 1998-2001 Mountaineer 4.0L 4WD
  • (Specifications)①Installation Position: Front Side; ②Extended Shaft Length: 31.92 inch; ③Compressed Shaft Length: 29.88 inch; ④Shaft Material: Steel; ⑤Shaft Diameter: Φ51; ⑥Shaft Wall Thickness: 0.118 inch; ⑦U-Joint Size: Φ27*81.8; ⑧Length is measured end to end across the entire driveshaft
  • (Reference Number)936813,F77Z4A376BA,XL2Z4A376AA,ZZR025100
  • (Attention)①Mounting Type: Ball Cage + Universal Joint; ②Adjustable Length for Custom Fit; ③Please verify vehicle compatibility via Philtop’s Confirmed Fit Tool and thoroughly read the product description prior to purchase
  • (Quiet Operation Design) The unit features precision bearings and premium grease, along with closely controlled tolerances. This setup is intended to minimize operational noise while the vehicle is in motion

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1997 - 20011997 - 20011997 - 19992000 - 20011999 - 20011997 - 20012005200120022003 - 20052003 - 20052001 - 20052001 - 20052005 - 200919981998199820092006 - 20082006 - 20102004200420032005 - 20101998 - 19991998 - 20032005 - 20081998 - 20032005 - 20102003 - 20101998 - 19991998 - 20081998 - 201020021998 - 200119982002 - 20091998 - 20012003 - 200820001998 - 2001
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordMazdaMazdaMazdaMazdaMazdaMazdaMazdaMercury
ModelExplorerExplorerExplorerExplorerExplorerExplorerExplorer Sport TracExplorer Sport TracExplorer Sport TracExplorer Sport TracExplorer Sport TracRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerB3000B3000B3000B4000B4000B4000B4000Mountaineer
TrimEddie BauerLimitedXLXL FleetXLSXLTAdrenalinBaseXLXLSXLTEdgeEdgeFX4SplashSplashSplashSportSportSportTremorTremorXLXLXLXLXLXLXLXLTXLTXLTXLTBaseSESXBaseSESETroy LeeBase
Engine4.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V63.0L V64.0L V64.0L V62.5L L43.0L V64.0L V62.3L L43.0L V64.0L V63.0L V64.0L V62.3L L42.3L L42.5L L43.0L V63.0L V64.0L V64.0L V62.3L L42.5L L43.0L V64.0L V63.0L V63.0L V63.0L V64.0L V64.0L V64.0L V64.0L V64.0L V6
Note-----------------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the driveshaft length, spline count, flange type, mounting pattern and number of sections.
  • Inspect the shaft tube, U-joints, splines, center support bearing and rubber cushions for damage or excessive play.
  • Measure driveshaft length with the vehicle at normal ride height, not with the suspension hanging freely.
  • Support the vehicle securely and keep the transmission and rear axle at approximately the same height.
  • Before removal, clearly mark the front and rear orientation, flange positions and section alignment. The driveshaft must not be installed backward.

Installation Steps

  • Step-1: Place the transmission in Neutral when rotation is required, secure the wheels and support the driveshaft.
  • Step-2: Loosen the rear flange bolts gradually in a diagonal sequence.
  • Step-3: Disconnect the rear flange, center support bearing and front connection. Keep the driveshaft supported horizontally.
  • Step-4: Cap the transmission and differential openings immediately to prevent fluid leakage and contamination.
  • Step-5: Install the front end in the correct direction and align all previously made orientation and phase marks.
  • Step-6: Install the center support bearing without twisting or preloading its rubber cushion.
  • Step-7: Connect the rear flange and hand-start all bolts.
  • Step-8: Use a torque wrench to tighten all flange and support-bearing bolts to the vehicle manufacturer's specified torque. Do not use an impact wrench.

After Installation

  • Confirm all phase marks remain aligned and the driveshaft has not been installed front-to-rear.
  • Rotate the shaft by hand and check for binding, interference or abnormal joint movement.
  • Perform a low-speed road test, then gradually increase speed while checking for noise or vibration.
  • Reinspect all fasteners, support bearings and transmission or differential seals after the test drive.

Product Description

Drive Shaft AssemblyDrive Shaft Assembly

Reviews

4.7/5

Based on 7 reviews

571%
429%
30%
20%
10%

DIY_Karen_701

12/18/2025

Shipping was fast and everything was secure in the box. Had a small question about alignment and the customer service folks knew exactly what to tell me. Very happy.

Rob_HomeGarage_738

02/28/2026

I'm not a pro mechanic, but I got this installed without too much trouble. It feels solid and is a much better deal than buying from the dealer.

FAQS

No FAQs have been added for this product yet.