1999-2004 Jeep Grand Cherokee 4.0L L6/4.7L V8 | Front Driver Side CV Axle Shaft | 663298 - PHILTOP

1999-2004 Jeep Grand Cherokee 4.0L L6/4.7L V8 | Front Driver Side CV Axle Shaft | 663298 - PHILTOP

Front Left

Built to Last

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
91ISSHA9297US

Specifications

Brand
PHILTOP
Position
Front Left
ABS Ring Included
Yes
Quantity
1
Input Shaft Spline Count
27
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
27
Items Included
1x Front Left Cv Axle Shaft - 663298
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
663298

Highlights

  • Fitment: Front Left Axle Shaft for 1999-2003 Grand Cherokee 4WD, 2004-2004 Grand Cherokee AWD (w/24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle).
  • Reference Number: 5012457AB, 663298. CV shafts deliver outstanding performance and long-lasting durability.
  • Reliably: Enjoy a smoother, more reliable ride with our high-quality CV axles. The high quality materials and excellent performance of our half shafts provide reliable support for your vehicle!
  • High Quality: Half shafts are 100% ground to improve ball path and surface finish and extend product life.CV shafts are normalised to ensure stability in subsequent machining.
  • Function: Half shafts for equal speed power transmission and wheel steering through pendulum angle.CV axles are designed in strict accordance with OE standards, with 100% inspection of key mating dimensions.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20041999 - 200420042004200420042004
MakeJeepJeepJeepJeepJeepJeepJeep
ModelGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand Cherokee
TrimLaredoLaredoLimitedLimitedOverlandSpecial EditionSpecial Edition
Engine4.0L L64.7L V84.0L L64.7L V84.7L V84.0L L64.7L V8
Note
w/ 24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle
w/ 24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle
w/ 24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle
w/ 24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle
w/ 24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle
w/ 24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle
w/ 24-5/16 (in) Overall Length;w/o Variable Lock Progressive Front Axle

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.6/5

Based on 9 reviews

567%
422%
311%
20%
10%

john noterman

03/12/2026

Verified buyer

So far so good.

Jennifer_Auto_573

05/25/2026

Lightning fast shipping and the packaging was really good. Had a question about installation and customer service was super helpful.

FAQS

No FAQs have been added for this product yet.