2010-2015 Lexus RX350 3.5L V6 | Front Driver Side CV Axle Shaft | 665308 - PHILTOP

2010-2015 Lexus RX350 3.5L V6 | Front Driver Side CV Axle Shaft | 665308 - PHILTOP

Front Left

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
89ISSHA8117US

Specifications

Brand
PHILTOP
Position
Front Left
ABS Ring Included
Yes
Quantity
1
Input Shaft Spline Count
24
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
30
Items Included
1x Front Left Cv Axle Shaft - 665308
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
665308

Highlights

  • Fitment: Front Left Axle Shaft for 2010-2015 RX350, 2011-2011 RX450h FWD, 2011-2013 Highlander 2.7L, 2014-2016 Highlander GAS, 2009-2015 Venza.
  • Reference Number: 665308, 434200E030, 434200T020, 434200T010.
  • Reliably: Enjoy a smoother, more reliable ride with our high-quality CV axles. The high quality materials and excellent performance of our half shafts provide reliable support for your vehicle!
  • High Quality: Half shafts are 100% ground to improve ball path and surface finish and extend product life.CV shafts are normalised to ensure stability in subsequent machining.
  • Function: Half shafts for equal speed power transmission and wheel steering through pendulum angle.CV axles are designed in strict accordance with OE standards, with 100% inspection of key mating dimensions.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20152013 - 201520112011 - 20132014 - 20162014 - 20162014 - 20162014 - 201620132011 - 20122014 - 20162009 - 20112009 - 20112012 - 20152012 - 20142012 - 20152012 - 20152012 - 2015
MakeLexusLexusLexusToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelRX350RX350RX450hHighlanderHighlanderHighlanderHighlanderHighlanderHighlanderHighlanderHighlanderVenzaVenzaVenzaVenzaVenzaVenzaVenza
TrimBaseF SportBaseBaseLELELE PlusLimitedPlusSEXLEBaseBaseLELELimitedXLEXLE
Engine3.5L V63.5L V63.5L V62.7L L42.7L L43.5L V63.5L V63.5L V62.7L L42.7L L43.5L V62.7L L43.5L V62.7L L43.5L V63.5L V62.7L L43.5L V6
Note------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.7/5

Based on 7 reviews

586%
40%
314%
20%
10%

Brad_AutoParts_144

04/21/2026

Shipping was super fast, and the part was packed really well. Customer service was excellent, they answered my email within an hour. Very happy with my purchase.

CarGuy_John_697

12/14/2025

Popped right into my Highlander with no issues. Much easier than other axles I've had to install. Feels solid and well-balanced.

FAQS

No FAQs have been added for this product yet.