2005-2009 Honda TRX500FM FourTrax Foreman 4x4 | Front Passenger Side ATV/UTV Compatible CV Axle 19.46in | HON7008 - PHILTOP

2005-2009 Honda TRX500FM FourTrax Foreman 4x4 | Front Passenger Side ATV/UTV Compatible CV Axle 19.46in | HON7008 - PHILTOP

Front Right

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2696SHA753VUS

Specifications

Brand
PHILTOP
Position
Front Right
ABS Ring Included
No
Quantity
1
Input Shaft Spline Count
20
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
21
Items Included
1x Front Right Cv Axle Shaft
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
HON7008

Highlights

  • Vehicle Fitment: Front Left 60-3555 Axle Shaft for 2007-2008 Pacifica 4.0L.
  • CV Joint OE Number: APCVA1448, 603555, NCV12001, 4880341AC, 4880341AB, 60-3555.
  • High Quality: Half shafts are normalized to ensure product stability.The cv shafts are also ground to improve the ball path and ball surface finish to prolong the product life.
  • Factory Testing: All cv axle shafts undergo a triple factory inspection as a means of confirming product accuracy.Our Axle shafts remain in great condition under extreme conditions.
  • Purchase Verification: Before purchasing, please confirm that the cv axle will fit your vehicle by entering 'Year-Make-Model' through the Suncentauto adapter.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20092011 - 20142005 - 20092011 - 20132005 - 20082005 - 20092011 - 201320092011 - 20142007 - 20092011 - 20132008 - 20092011 - 2013200520052006 - 20182006 - 2009
MakeHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelTRX500FA FourTrax Foreman RubiconTRX500FA FourTrax Foreman RubiconTRX500FE FourTrax Foreman 4x4 ESTRX500FE FourTrax Foreman 4x4 ESTRX500FGA FourTrax Foreman Rubicon GPScapeTRX500FM FourTrax Foreman 4x4TRX500FM FourTrax Foreman 4x4TRX500FPA FourTrax Foreman 4x4 AT w/ Power SteeringTRX500FPA FourTrax Foreman Rubicon with EPSTRX500FPE FourTrax Foreman 4x4 ES w/ Power SteeringTRX500FPE FourTrax Foreman 4x4 ES w/ Power SteeringTRX500FPM FourTrax Foreman 4x4 w/ Power SteeringTRX500FPM FourTrax Foreman 4x4 w/ Power SteeringTRX650FA FourTrax RinconTRX650FGA FourTrax Rincon GPScapeTRX680FA FourTrax RinconTRX680FGA FourTrax Rincon GPScape
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBaseBase
Engine-----------------
Note
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
4X4;Standard Duty Replacement
4X4;Standard Duty Replacement
4X4;Standard Duty Replacement
4X4;Standard Duty Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

5.0/5

Based on 10 reviews

5100%
40%
30%
20%
10%

Isaiah

08/12/2026

Verified buyer

fit great on my 2000 Honda accord xl super easy install and came with gloves and the packaging was great and shipped two days early

Matt Pierce

07/18/2026

Verified buyer

Perfect fit for 2020 telluride awd. Fixed the common wobble issue, no more slinging grease!

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.