
2014-2016 Subaru XV Crosstrek 2.0L H4 | Front Driver Side CV Axle Shaft | 667576 - PHILTOP
Front Left or Right
Built to Last
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 15ISSHA8797US
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2016 | 2016 | 2016 | 2016 | 2016 | 2015 | 2014 - 2015 | 2014 - 2015 | 2014 - 2015 | 2014 - 2015 |
|---|---|---|---|---|---|---|---|---|---|---|
| Make | Subaru | Subaru | Subaru | Subaru | Subaru | Subaru | Subaru | Subaru | Subaru | Subaru |
| Model | Crosstrek | Crosstrek | Crosstrek | Crosstrek | Crosstrek | XV Crosstrek | XV Crosstrek | XV Crosstrek | XV Crosstrek | XV Crosstrek |
| Trim | Base | Hybrid | Hybrid Touring | Limited | Premium | Base | Hybrid | Hybrid Touring | Limited | Premium |
| Engine | 2.0L H4 | 2.0L H4 | 2.0L H4 | 2.0L H4 | 2.0L H4 | 2.0L H4 | 2.0L H4 | 2.0L H4 | 2.0L H4 | 2.0L H4 |
| Note | Supplied with Standard Neoprene Outboard Boot | Supplied with Standard Neoprene Outboard Boot | Supplied with Standard Neoprene Outboard Boot | Supplied with Standard Neoprene Outboard Boot | Supplied with Standard Neoprene Outboard Boot | From 01/11/2014 | From 01/11/2014 | From 01/11/2014 | From 01/11/2014 | From 01/11/2014 |
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
- Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
- Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.

- Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
- Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.

Installation Steps
- Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
- Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
- Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
- Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
- Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
- Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.
After Installation
- Confirm the inner joint is fully seated and all fasteners are secure.
- Check the CV boots, clamps and axle seal for damage or leakage.
- Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
- Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
- If suspension geometry was disturbed, have the wheel alignment checked.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2014-2016 Subaru XV Crosstrek 2.0L H4 | Front Driver Side CV Axle Shaft | 667576 - PHILTOP
Front Left or Right
Built to Last
- SKU:
- 15ISSHA8797US
$100.23
Check if this fits your vehicle
Select a vehicle to check this product.
- Position
- Front Left or Right
- ABS Ring Included
- Yes
- Quantity
- 1
- Input Shaft Spline Count
- 25
- Material
- SAE 1055 Steel and Chloroprene Rubber
- Output Shaft Spline Count
- 27
- Items Included
- 1x Front Left or Right Cv Axle Shaft - 667576
- Axle Nut Included
- Yes
- Fitment: CV Axle Shaft Assembly Compatible with 2016 Subaru Crosstrek, 2014-2015 XV Crosstrek(From 01/11/2014)
- Specifications: ①Position: Front Left or Right; ②Compressed length: 31.18 inch; ③Output Shaft Spline Count: 27; ④Input Shaft Spline Count: 25; ⑤ABS Ring Included: Yes; ⑥Axle Nut Included: Yes
- Durable Construction: These constant-velocity (CV) joint drive shaft assemblies are manufactured from 55# steel and neoprene rubber, providing reliable strength and toughness under demanding driving conditions. This further extends the service life of the CV axle shafts
- Smooth Driving: Every CV joint assembly is tested to prevent vibration under extreme conditions. Advanced manufacturing processes ensure the best possible and most durable surface finish on the cv axles, thereby reducing friction and wear. This guarantees a quiet and comfortable driving experience
- Function: The CV axle shaft is the final connecting component between the engine and the wheels; it is responsible for transmitting the power generated by the vehicle’s gearbox and differential to the wheels, thereby propelling the vehicle forward. A new drive shaft can significantly enhance the driving experience
0.0
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2016 | Subaru | Crosstrek | Base | 2.0L H4 | Supplied with Standard Neoprene Outboard Boot |
| 2016 | Subaru | Crosstrek | Hybrid | 2.0L H4 | Supplied with Standard Neoprene Outboard Boot |
| 2016 | Subaru | Crosstrek | Hybrid Touring | 2.0L H4 | Supplied with Standard Neoprene Outboard Boot |
| 2016 | Subaru | Crosstrek | Limited | 2.0L H4 | Supplied with Standard Neoprene Outboard Boot |
| 2016 | Subaru | Crosstrek | Premium | 2.0L H4 | Supplied with Standard Neoprene Outboard Boot |
| 2015 | Subaru | XV Crosstrek | Base | 2.0L H4 | From 01/11/2014 |
| 2014 - 2015 | Subaru | XV Crosstrek | Hybrid | 2.0L H4 | From 01/11/2014 |
| 2014 - 2015 | Subaru | XV Crosstrek | Hybrid Touring | 2.0L H4 | From 01/11/2014 |
| 2014 - 2015 | Subaru | XV Crosstrek | Limited | 2.0L H4 | From 01/11/2014 |
| 2014 - 2015 | Subaru | XV Crosstrek | Premium | 2.0L H4 | From 01/11/2014 |
Product Specifications
- Brand
- PHILTOP
- Position
- Front Left or Right
- ABS Ring Included
- Yes
- Quantity
- 1
- Input Shaft Spline Count
- 25
- Material
- SAE 1055 Steel and Chloroprene Rubber
- Output Shaft Spline Count
- 27
- Items Included
- 1x Front Left or Right Cv Axle Shaft - 667576
- Axle Nut Included
- Yes
- Warranty Period
- 2-Year
- Part Number
- 667576
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
- Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
- Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.

- Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
- Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.

Installation Steps
- Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
- Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
- Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
- Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
- Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
- Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.
After Installation
- Confirm the inner joint is fully seated and all fasteners are secure.
- Check the CV boots, clamps and axle seal for damage or leakage.
- Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
- Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
- If suspension geometry was disturbed, have the wheel alignment checked.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.