1992-2000 Honda Civic 1.5L L4/1.6L L4 | Front Driver Side & Passenger Side CV Axle Shaft | 664060 - PHILTOP

1992-2000 Honda Civic 1.5L L4/1.6L L4 | Front Driver Side & Passenger Side CV Axle Shaft | 664060 - PHILTOP

Front

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6291SHA7699US

Specifications

Brand
PHILTOP
Position
Front
ABS Ring Included
Yes
Quantity
2
Input Shaft Spline Count
25
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
26
Items Included
1x Front Cv Axle Shaft - 664060 1x Front Cv Axle Shaft - 664064
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
664060,664064

Highlights

  • Fitment: Front Left CV Axle for 2009-2013 Corolla 1.8L, 2015-2017 Corola Manual(From 01/2015), 2016-2016 Corolla Automatic, 2009-2013 Matrix 1.8L, 2009-2010 Vibe 1.8L. Please use the filters to confirm that the half shaft fits your vehicle.
  • OE Designed: CV axle driveshafts utilize proprietary engineering designed to smoothly transmit torque at constant speeds to ensure they meet the form, fit and function requirements of the original halfshafts.
  • Function: CV axles are the final link between the engine and the wheels, transferring power from the vehicle's transmission and differential to the wheels to drive the vehicle forward. A good CV axle assembly makes for a smoother ride.
  • High Quality: The cv axle shafts are made of high quality materials with strong corrosion resistance, which improves the reliability and performance of the cv axle assembly.
  • Easy to install: Brand new cv axle shaft. Threads and splines are precision rolled for easy direct replacement.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1992 - 19951996 - 20001992 - 19951996 - 20001992 - 20001998 - 20001996 - 20001992 - 19951996 - 20001992 - 19951992 - 199519991993 - 19951996 - 199719931995 - 1997
MakeHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivic del SolCivic del SolCivic del SolCivic del Sol
TrimCXCXDXDXEXGXHXLXLXSiVXValue PackageSSSiSi
Engine1.5L L41.6L L41.5L L41.6L L41.6L L41.6L L41.6L L41.5L L41.6L L41.6L L41.5L L41.6L L41.5L L41.6L L41.6L L41.6L L4
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

T

08/25/2026

Verified buyer

I picked this up for my Chevy Silverado 2500 and it was a perfect fit. Installation went smoothly, and everything lined up as it should. From inspecting it during installation, the axle appears to be made with quality materials. The rubber boot in particular seems to be good quality and well made. I haven’t had it installed long enough to comment on long-term durability, but I’m hoping it holds up for a long time. So far, I’m happy with the fit and quality.

Dxpe Mikie

06/20/2026

Verified buyer

First time doing Cv axle and no bs it was way easier than I thought. I was concerned about it not having the rubber bushing on the shaft like the old one but no worries it fits perfectly

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.