
2010-2017 Chevrolet Equinox 2.4L/3.0L/3.6L | 6 PC Front Lower Control Arm | OE#20945779/K750189 - PHILTOP
Ball Joint Included
Corrosion Resistant
Deformation Resistant
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 2858CAK4914US
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2015 - 2017 | 2010 - 2017 | 2010 - 2017 | 2010 - 2012 | 2013 - 2017 | 2010 - 2016 | 2010 - 2012 | 2013 - 2016 | 2017 | 2017 | 2013 - 2017 | 2013 - 2017 | 2015 - 2017 | 2010 - 2017 | 2010 - 2012 | 2013 - 2017 | 2010 - 2017 | 2010 - 2012 | 2013 - 2017 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Make | Chevrolet | Chevrolet | Chevrolet | Chevrolet | Chevrolet | Chevrolet | Chevrolet | Chevrolet | Chevrolet | Chevrolet | GMC | GMC | GMC | GMC | GMC | GMC | GMC | GMC | GMC |
| Model | Equinox | Equinox | Equinox | Equinox | Equinox | Equinox | Equinox | Equinox | Equinox | Equinox | Terrain | Terrain | Terrain | Terrain | Terrain | Terrain | Terrain | Terrain | Terrain |
| Trim | L | LS | LT | LT | LT | LTZ | LTZ | LTZ | Premier | Premier | Denali | Denali | SL | SLE | SLE | SLE | SLT | SLT | SLT |
| Engine | 2.4L L4 | 2.4L L4 | 2.4L L4 | 3.0L V6 | 3.6L V6 | 2.4L L4 | 3.0L V6 | 3.6L V6 | 2.4L L4 | 3.6L V6 | 2.4L L4 | 3.6L V6 | 2.4L L4 | 2.4L L4 | 3.0L V6 | 3.6L V6 | 2.4L L4 | 3.0L V6 | 3.6L V6 |
| Note | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the installation side, mounting points and ball-joint configuration.
- Inspect the new control arm, bushings, ball joint and dust boot for damage.
- Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
- Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
- Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
- Step-1: Raise and support the vehicle, then remove the wheel.
- Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
- Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
- Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
- Step-5: Position the new arm and hand-start all fasteners.
- Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
- Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
- Confirm all fasteners and locking components are secure.
- Check that the wheel rotates freely without interference.
- Perform a short, low-speed road test and check for noise, pulling or unstable steering.
- A professional four-wheel alignment is required after installation.
- Recheck the installation after the first 50–100 km.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2010-2017 Chevrolet Equinox 2.4L/3.0L/3.6L | 6 PC Front Lower Control Arm | OE#20945779/K750189 - PHILTOP
Ball Joint Included
Corrosion Resistant
Deformation Resistant
- SKU:
- 2858CAK4914US
$153.61
Check if this fits your vehicle
Select a vehicle to check this product.
- Items Included
- 1x Front Lower Control Arm W/ Ball Joint Assembly - Driver Side - K623489(524-157) 1x Front Lower Control Arm W/ Ball Joint Assembly - Passenger Side - K623488(524-158) 1x Front Stabilizer Sway Bar End Link - Driver Side - K750188 1x Front Stabilizer Sway Bar End Link - Passenger Side - K750189 2x Front Outer Tie Rod Ends - Driver and Passenger Side - ES800640
- Quantity
- 6
- Position
- Front Lower
- Surface Finish
- Chrome
- Material
- Steel
- Warranty Period
- 2-Year
- #80,194 in Automotive (See Top 100 in Automotive)
- #164 in Automotive Replacement Control Arms
- Fitment: Front Control Arms Kit Replacement for 2010 2011 2012 2013 2014 2015 2016 2017 Chevrolet Equinox - [2010 2011 2012 2013 2014 2015 2016 2017 GMC Terrain]
- Kit Includes: 1x Front Lower Control Arm w/ Ball Joint Assembly - Driver Side - K623489(524-157);1x Front Lower Control Arm w/ Ball Joint Assembly - Passenger Side - K623488(524-158);1x Front Stabilizer Sway Bar End Link - Driver Side - K750188;1x Front Stabilizer Sway Bar End Link - Passenger Side - K750189;2x Front Outer Tie Rod Ends - Driver and Passenger Side - ES800640
- High Quality: Polishing and rust prevention; the anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are env-ironmentally friendly
- Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
- PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model
0.0
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2015 - 2017 | Chevrolet | Equinox | L | 2.4L L4 | - |
| 2010 - 2017 | Chevrolet | Equinox | LS | 2.4L L4 | - |
| 2010 - 2017 | Chevrolet | Equinox | LT | 2.4L L4 | - |
| 2010 - 2012 | Chevrolet | Equinox | LT | 3.0L V6 | - |
| 2013 - 2017 | Chevrolet | Equinox | LT | 3.6L V6 | - |
| 2010 - 2016 | Chevrolet | Equinox | LTZ | 2.4L L4 | - |
| 2010 - 2012 | Chevrolet | Equinox | LTZ | 3.0L V6 | - |
| 2013 - 2016 | Chevrolet | Equinox | LTZ | 3.6L V6 | - |
| 2017 | Chevrolet | Equinox | Premier | 2.4L L4 | - |
| 2017 | Chevrolet | Equinox | Premier | 3.6L V6 | - |
| 2013 - 2017 | GMC | Terrain | Denali | 2.4L L4 | - |
| 2013 - 2017 | GMC | Terrain | Denali | 3.6L V6 | - |
| 2015 - 2017 | GMC | Terrain | SL | 2.4L L4 | - |
| 2010 - 2017 | GMC | Terrain | SLE | 2.4L L4 | - |
| 2010 - 2012 | GMC | Terrain | SLE | 3.0L V6 | - |
| 2013 - 2017 | GMC | Terrain | SLE | 3.6L V6 | - |
| 2010 - 2017 | GMC | Terrain | SLT | 2.4L L4 | - |
| 2010 - 2012 | GMC | Terrain | SLT | 3.0L V6 | - |
| 2013 - 2017 | GMC | Terrain | SLT | 3.6L V6 | - |
Product Specifications
- Brand
- PHILTOP
- Items Included
- 1x Front Lower Control Arm W/ Ball Joint Assembly - Driver Side - K623489(524-157) 1x Front Lower Control Arm W/ Ball Joint Assembly - Passenger Side - K623488(524-158) 1x Front Stabilizer Sway Bar End Link - Driver Side - K750188 1x Front Stabilizer Sway Bar End Link - Passenger Side - K750189 2x Front Outer Tie Rod Ends - Driver and Passenger Side - ES800640
- Quantity
- 6
- Position
- Front Lower
- Surface Finish
- Chrome
- Material
- Steel
- Warranty Period
- 2-Year
- OE Number
- 20945779,20945780,96844892,96844891,19207057,15779960,15779961,4243078J00,4242078J00,19210064
- Part Number
- K750189,K750188,ES800640,RK623488,RK623489,TA5216,TO91045PR,TO91045XL
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the installation side, mounting points and ball-joint configuration.
- Inspect the new control arm, bushings, ball joint and dust boot for damage.
- Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
- Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
- Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
- Step-1: Raise and support the vehicle, then remove the wheel.
- Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
- Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
- Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
- Step-5: Position the new arm and hand-start all fasteners.
- Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
- Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
- Confirm all fasteners and locking components are secure.
- Check that the wheel rotates freely without interference.
- Perform a short, low-speed road test and check for noise, pulling or unstable steering.
- A professional four-wheel alignment is required after installation.
- Recheck the installation after the first 50–100 km.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.