2003-2006 Nissan Sentra 1.8L L4 | Power Steering Pump | 215346 - PHILTOP

2003-2006 Nissan Sentra 1.8L L4 | Power Steering Pump | 215346 - PHILTOP

Leak-Tested

Durable

0.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4243PSP582PUS

Specifications

Brand
PHILTOP
Pulley Included
No
Reservoir Included
No
Pulley Attachment Type
Bolt-on
Outlet Connection Type
Threaded
Outlet Thread Size
16X1.5 in
Inlet Connection Type
Hose Barb
Drive Type
Engine
Material
Aluminium/Iron
Items Included
1x Power Steering Pump - 215346, 1x Manual
Warranty Period
2-Year
Part Number
215346

Highlights

  • (Fitment)2003 2004 2005 2006 Sentra 1.8L
  • (Specifications)215346, 491104Z800; Pulley Included: No, Reservoir Included: No, Inlet Attachement Type: Hose Barb, Outlet Attachment Type: Threaded, Pulley attachment types: Bolt-on, Outlet inner diameter size: 16X1.5
  • (Enhanced Durability)Automotive steering system replacement parts-power steering pump are built with high-grade aluminum alloy, this pump is built for long-lasting reliability, and multiple tests have been taken to ensure quality and durability, and keeps the wheels running in the right conditions, giving you a smoother and more comfortable ride.
  • (Feature)Sentra power steering pump applies the correct amount of pressure to turn the wheels smoothly, eliminate groaning and squealing noises.If you have symptoms like whining noise while turning the wheel, steering wheel slow to respond, stiff steering wheel, or squealing & groaning noises when the vehicle starts, you might need to have your old pump replaced.
  • (Professional Customer Service) Please confirm your car model and product part number, and check your car model in the Philtop accessories system in the upper left corner before taking an order, calculate the year and model and check the compatibility label, or send us a message to make sure it is an exact match.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 200620032004 - 20062003
MakeNissanNissanNissanNissan
ModelSentraSentraSentraSentra
TrimBaseGXESXE
Engine1.8L L41.8L L41.8L L41.8L L4
Note
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line Filter available;Reservoir Not Included

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0550-Power steering pressure sensor circuit — inspect the sensor connector and wiring.
  • P0551–P0553-Pressure sensor circuit range/performance or low/high input — check pressure, sensor signals, and wiring.
  • P0620-Generator control circuit — check the charging system and related wiring.
  • P0562-Low system voltage — check the battery, charging output, and power connections.

Codes alone do not confirm power steering pump failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Confirm fitment: Compare mounting points, pulley specifications, fluid ports, and any sensor connectors.
  • Inspect the system: Check fluid condition, hoses, seals, and the drive belt for leaks or damage.
  • Check the new pump: Inspect for shipping damage and confirm smooth pulley rotation where applicable.

Installation Steps

  • STEP 1 — Let the engine cool, disconnect the negative battery cable, and drain the power steering fluid.
  • STEP 2 — Photograph the belt routing and hose connections. Release belt tension and remove the belt from the pump.
  • STEP 3 — Disconnect hoses and any wiring. Cap open lines to keep out dirt, then remove the old pump.
  • STEP 4 — Clean or flush contaminated lines. Install the new pump with new specified seals and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses and wiring. Reinstall the belt with correct alignment and tension.
  • STEP 6 — Fill with the specified fluid and bleed the system using the vehicle-specific procedure. Never run the pump dry or hold the steering at full lock.

After Installation

  • Verify correct belt seating and secure hose connections.
  • With the engine idling, check for smooth steering assist without unusual noise or vibration.
  • Inspect the pump and lines for leaks.
  • Switch off the engine, allow the fluid to settle, and recheck the level.

Product Video

Product Description

Power Steering PumpPower Assist Pump

Reviews

0.0/5

Based on 0 reviews

50%
40%
30%
20%
10%

No reviews match these filters.

FAQS

Please take the time to carefully verify if your vehicle is compatible with our offering.Please under the guidance of professionals, ensure a smooth and expert installation process. (Instructions not included)

Mismatched high-pressure interface size, aging of sealing ring or gasket. The low-pressure pipe is damaged or loosened: Check whether the oil pipe is loose after tightening the bolts, and whether the gasket or seal is deformed.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.