2007-2017 Jeep Wrangler 3.8L V6/3.6L V6 | Front Right Power Window Regulator w/Motor | 748913 - PHILTOP

2007-2017 Jeep Wrangler 3.8L V6/3.6L V6 | Front Right Power Window Regulator w/Motor | 748913 - PHILTOP

Powerful Motor

Upgraded Pulley & Cable

Quiet & Smooth Operation

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
33ISPWR3587US

Specifications

Brand
PHILTOP
Type
Power Window Regulator
Mode
Power, With Motor
Motor Included
Yes
Pin Quantity
2
Items Included
1x Front Right Window Regulator - 748-913
Material
Stainless Steel
Torque
9 N·m
Input Voltage
13.5
Quantity
1
Motor Speed
95 RPM
Warranty Period
2-Year
Part Number
748913

Highlights

  • Vehicle Fitment:Window Regulator and Motor Assembly compatible with Jeep 2007-2017 Wrangler 2018 Wrangler JK.Please MATCH your vehicle on the left top before purchasing
  • OEM Number: 68014948AA, 748913, 68014952AA
  • Perfect Fit: Please check the description and compatibility chart before your purchasing.Also you can input your make, model and trim level into the Philtop Garage to make sure this type is exactly applicable for you
  • Safety anti-pinch protection: The window regulator uses current monitoring or sensors to detect resistance and automatically stops or reverses to prevent fingers from being pinched, which is especially important for children
  • Customer Service:We provide a 24-month coverage, if your window regulator malfunctions or fails to operate, please contact us to receive a free replacement

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year201120162012 - 20172007 - 20112012 - 20172007 - 20112012 - 20172010 - 20112016201120162012 - 20172007 - 20112012 - 20172007 - 20112012 - 20172010 - 201120162007 - 20102007 - 201020182018201820182018201820182018
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWrangler JKWrangler JKWrangler JKWrangler JKWrangler JKWrangler JKWrangler JKWrangler JK
Trim70th Anniversary75th AnniversaryRubiconRubiconSaharaSaharaSportSportSport SUnlimited 70th AnniversaryUnlimited 75th AnniversaryUnlimited RubiconUnlimited RubiconUnlimited SaharaUnlimited SaharaUnlimited SportUnlimited SportUnlimited Sport SUnlimited XXRubiconSaharaSportSport SUnlimited RubiconUnlimited SaharaUnlimited SportUnlimited Sport S
Engine3.8L V63.6L V63.6L V63.8L V63.6L V63.8L V63.6L V63.8L V63.6L V63.8L V63.6L V63.6L V63.8L V63.6L V63.8L V63.6L V63.8L V63.6L V63.8L V63.8L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V6
Note----------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the door position, regulator type, mounting holes, connector and motor configuration.
  • Check the fuse, switch, wiring and connector before replacing the regulator.
  • Inspect the glass channels, guide rails and mounting brackets for damage or excessive resistance.
  • Disconnect the negative battery cable and securely support the window glass.
  • Confirm whether window initialization is required after installation.

Installation Steps

  • Step-1: Remove the door trim panel and carefully peel back the moisture barrier.
  • Step-2: Move the glass to the mounting-access position and disconnect the motor connector.
  • Step-3: Release the glass from the regulator and secure it in the raised position.
  • Step-4: Remove the old regulator and clean the guide channels and mounting area.
  • Step-5: Install the new regulator, hand-start the fasteners and reconnect the glass.
  • Step-6: Tighten the fasteners to specification and reconnect the motor and battery.
  • Step-7: Test the window before reinstalling the moisture barrier and door panel.

After Installation

  • Run the window fully up and down several times.
  • Check for binding, tilting, vibration or abnormal noise.
  • Confirm the glass seals correctly at the fully closed position.
  • Initialize the one-touch and anti-pinch functions when required.
  • Ensure the wiring and cables are not trapped behind the door panel.

Product Video

Product Description

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

RUEL REYNOLDS

11/30/2025

Verified buyer

Very impressed with the new window motor, very easy to install, match perfectly for my truck, seems to be very good quality, it s is best that window has ever moved.

Mike from Texas_749

06/19/2026

This regulator was a breeze to install in my Jeep. Works perfectly and feels really solid. It's a great option if you need to replace your old one.

FAQS

No FAQs have been added for this product yet.