2008-2012 Honda Accord 2.4L/3.5L | Front Left, 1 PC Steering Knuckle | 698447 - PHILTOP

2008-2012 Honda Accord 2.4L/3.5L | Front Left, 1 PC Steering Knuckle | 698447 - PHILTOP

Front Left

Wheel Bearing Included

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
62ISSKB0097US

Specifications

Brand
PHILTOP
Position
Front Left
Material
Steel
Items Included
1x Front Left Steering Knuckle Wheel Hub Bearing - 698-447
Wheel Bearing Included
Yes
Quantity
1
Warranty Period
2-Year
Part Number
698447

Highlights

  • (Specification) Installation Position: Front Driver Side; Condition: Brand New; Material: Steel; Loaded Knuckle Included: Yes; Hub Included: Yes; Bearing Included: Yes; Axle Included: No.
  • (Material & Quanlity)This Steering Knuckle has undergone quality testing , including vehicle try-on, material and corrosion testing for conformance to product standards
  • (Vehicle Adaptation):This steering knuckle & wheel bearing hub assembly compatible with Accord 2008-2012, TSX 2009-2014
  • (Reference Part Number):‎44300TA0A61; 44300TA0A62; 44600TA0A00; 45255TA0A00; 51215TA0020, 698-447, LK051
  • (Ideal Replacement)This steering knuckle hub bearing assembly can help you resolve those problems: ① hard braking ② difficult turning of wheels ③ uneven tire wear ④ vehicle pulling ⑤ wheel vibration and wobble.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20142012 - 20142010 - 20142008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122011 - 2012
MakeAcuraAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHonda
ModelTSXTSXTSXAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseSpecial EditionV6EXEXEX-LEX-LLXLX-PLX-SSE
Engine2.4L L42.4L L43.5L V62.4L L43.5L V62.4L L43.5L V62.4L L42.4L L42.4L L42.4L L4
Note-----------

How to Install?

Checks Before Installation

  • Confirm the steering knuckle matches the vehicle, installation position and related components.
  • Inspect the wheel bearing, hub, ball joint and mounting points for damage or wear.
  • Prepare a professional vehicle lift, safety stands and torque wrench.
  • Do not use an impact wrench or hammer to force components into place.

Installation Steps

  • Step-1: Secure the Vehicle:Raise the vehicle with a professional lift and support it securely with safety stands.
  • Step-2: Remove the Components:Remove the wheel, brake components, ABS sensor, tie-rod end and other connected suspension parts.
  • Step-3: Transfer the Hub and Bearing:Use the correct press and adapters to remove or install the hub and bearing. Never hammer a new bearing or expose it to axial impact.
  • Step-4: Install the Steering Knuckle:Position the steering knuckle and hand-start all mounting bolts to prevent cross-threading.
  • Step-5: Reconnect the Components:Reconnect the ball joint, tie-rod end, strut, ABS sensor and brake components in their original positions.
  • Step-6: Torque All Fasteners:Use a torque wrench and tighten every fastener to the value specified in the vehicle service manual. Do not estimate torque or use an impact wrench for final tightening.

After Installation

  • Confirm all fasteners, brake components and ABS connections are secure.
  • Check for smooth wheel rotation, abnormal play or interference.
  • Perform a low-speed road test and check for noise, vibration or steering pull.
  • A professional four-wheel alignment is required after installation. Use a qualified alignment shop with professional equipment; a basic repair shop may not be able to complete the required calibration.

Product Video

Product Description

12

Reviews

4.3/5

Based on 6 reviews

550%
433%
317%
20%
10%

Uriel m.

03/14/2026

Verified buyer

Working as it should on my accord, no noise

DaveTheMechanic_960

05/20/2026

Installation was a breeze, everything lined up perfectly. It was a much simpler job than I anticipated, and the part felt solid going in. Way better than trying to replace just the bearing.

FAQS

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Some nuts, bolts, or cotter pins are specified for one-time use. Check the vehicle service information and replace locking hardware when required.

It may be possible on some designs, but press-in bearings can be damaged during removal and may not be suitable for reuse. Follow the service procedure and inspect all parts carefully.