2008-2012 Nissan Rogue 2.5L L4 | Front Complete Strut Assembly | 1333283L - PHILTOP

2008-2012 Nissan Rogue 2.5L L4 | Front Complete Strut Assembly | 1333283L - PHILTOP

Front

Complete Strut & Coil Spring Assembly

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9775SAA0690US

Specifications

Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 1333283R 1x Front Left Complete Strut Assembly - 1333283L
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
1333283L,1333283R

Highlights

  • [Struts Replacement Part OE Number]:1333283L,1333283R,54500JG00B.
  • [ Fitment ]: Automotive Replacement Struts Compatible for Nissan Rogue 2008-2012.
  • [Quality Test & Easy Installation]: PHILTOP each shock absorber is rigorously tested at the factory to ensure reliable quality. Fully pre-assembled with no modifications needed, the bolt-on design conforms to OE standards for straightforward, precise installation every time
  • [ Adapt To Various Temperature Environments ]:Built with oil‑, water‑ and solvent‑resistant materials, this PHILTOP shock absorber remains unaffected by temperature fluctuations, ensuring stable performance in all weather and operating conditions.
  • [Compatibility]: Confirm fitment with the Philtop Garage "confirmed fit" feature and review our full compatibility chart below before purchase.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20102011 - 2012
MakeNissanNissan
ModelRogueRogue
TrimSLSV
Engine2.5L L42.5L L4
Note
Front Left;Front Right
Front Left;Front Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

1

Reviews

4.8/5

Based on 5 reviews

580%
420%
30%
20%
10%

Osmani veigas

11/13/2025

Verified buyer

Lo recomiendo , tal cual a la descripción

Jeongvxy

12/15/2024

Verified buyer

New shock absorbers solved the problem Read more

FAQS

No FAQs have been added for this product yet.