2011-2016 Hyundai Elantra 1.8L/2.0L | Front Strut Assembly Set of 2 | OE#546513X140/172709 - PHILTOP

2011-2016 Hyundai Elantra 1.8L/2.0L | Front Strut Assembly Set of 2 | OE#546513X140/172709 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2563SAA100BUS

Specifications

Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 172708 1x Front Left Complete Strut Assembly - 172709
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
OE Number
546513X140,546613X140
Part Number
172709,172708,182709,182708

Highlights

  • (Adapted models):PHILTOP complete strut assembly compatible with 2011 2012 2013 2014 2015 2016 Elantra strut front left and right side. Replace complete shocks struts assembly No#:172709L, 172708R but to perfectly fit your vehicle, you can use the year, make, and model in the 'Philtopconfirmedfit' filtering system in the upper left corner of the link to confirm compatibility.
  • (Improve vehicle handling):PHILTOP strut provides structural support to the vehicle suspension, helping to restore body height to prevent grounding. It will improve driving maneuverability by 290%
  • (Shorten the braking distance): A new struts assembly helps maximize tire-to-road contact and distributes body weight evenly to each tire, which can shorten braking distances due to strut wear
  • (Reduce rebound):Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy
  • (Prevent rollover and sideslip):Replacing the worn struts improves roll and skid when turning and enhances cab capacity, providing you with a smoother ride

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2011 - 20132011 - 20162014 - 20162014 - 20162016
MakeHyundaiHyundaiHyundaiHyundaiHyundai
ModelElantraElantraElantraElantraElantra
TrimGLSLimitedSESportValue Edition
Engine1.8L L41.8L L41.8L L42.0L L41.8L L4
Note
Recommended OE Application -Specific Replacement;Front Left;Front Right
Recommended OE Application -Specific Replacement;Front Left;Front Right
Recommended OE Application -Specific Replacement;Front Left;Front Right
Recommended OE Application -Specific Replacement;Front Left;Front Right
Recommended OE Application -Specific Replacement;Front Left;Front Right

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

14-1

Reviews

5.0/5

Based on 5 reviews

5100%
40%
30%
20%
10%

Channell Turner

09/21/2025

Verified buyer

Exelent service and product

Diana

12/15/2024

Verified buyer

Installation is easy

FAQS

No FAQs have been added for this product yet.