2010-2011 Ford Flex 3.5L V6 | Front Strut Assembly w/Spring | 272535 - PHILTOP

2010-2011 Ford Flex 3.5L V6 | Front Strut Assembly w/Spring | 272535 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
30ISCSA0497US

Specifications

Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 272535 1x Front Left Complete Strut Assembly - 272534
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
272535,272534,282535,282534

Highlights

  • (Interchange Part number)Replace Complete Struts and Shocks NO#:272534, 282534, 272535, 282535.
  • (Vehicle Fitment)PHILTOP Struts Replace for Flex 2010-2011 3.5L.
  • (Superior Safety & Stability) Engineered for confidence. Improve tire-to-road contact by over 25% compared to worn shocks, leading to a significant reduction in braking distance on wet surfaces. Enjoy minimized body roll during cornering for a secure, planted feel at all speeds.
  • (Easy to install)PHILTOP Strut and Shocks Assembly comes pre-assembled, saving you time and effort on installation. No professional skills or special tools needed and no modifications or drilling required.
  • (Friendly reminder) Please double-check your vehicle's year, make, model, and engine. This helps us ensure you get the right part for a perfect fit!

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20122009 - 20122009 - 20122011 - 2012
MakeFordFordFordFord
ModelFlexFlexFlexFlex
TrimLimitedSESELTitanium
Engine3.5L V63.5L V63.5L V63.5L V6
Note
From 07/2009
From 07/2009
From 07/2009
From 07/2009

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

Reviews

5.0/5

Based on 3 reviews

5100%
40%
30%
20%
10%

Jessica Martella

04/22/2024

Verified buyer

I replaced the Front Struts on my 2011 Flex and got a Front Wheel alignment. Very smooth ride and feel like a new car !

DaveTheMechanic_549

05/26/2026

Came super fast, well-packed, nothing was damaged. Had a question about fitment and customer service was on point, real helpful folks.

FAQS

No FAQs have been added for this product yet.