2004-2006 Scion xB 1.5L | Front Shock Absorbers Struts w/Spring | 172245 - PHILTOP

2004-2006 Scion xB 1.5L | Front Shock Absorbers Struts w/Spring | 172245 - PHILTOP

Front

Complete Strut & Coil Spring Assembly

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
93ISSAA7067US

Specifications

Brand
PHILTOP
Items Included
2x Front Strut & Coil Spring Shock Assemblies - 172245
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
172245

Highlights

  • (Adapted models):PHILTOP Strut Assembly fit for xB/xA 2004 2005 2006. Replace complete shocks struts assembly No#:172245 but to perfectly fit your vehicle, you can use the year, make, and model in the 'Philtopconfirmedfit' filtering system in the upper left corner of the link to confirm compatibility.
  • (Shorten the braking distance): A new struts assembly helps maximize tire-to-road contact and distributes body weight evenly to each tire, which can shorten braking distances due to strut wear
  • (Prevent rollover and sideslip):Replacing the worn struts improves roll and skid when turning and enhances cab capacity, providing you with a smoother ride
  • (Reduce rebound):Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy
  • (Improve vehicle handling):PHILTOP strut provides structural support to the vehicle suspension, helping to restore body height to prevent grounding. It will improve driving maneuverability by 50%

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20062004 - 2006
MakeScionScion
ModelxAxB
TrimBaseBase
Engine1.5L L41.5L L4
Note
Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

14-1

Reviews

4.9/5

Based on 8 reviews

588%
413%
30%
20%
10%

Adriana Rangel

12/15/2024

Verified buyer

Good product good quality

KELLY YOUNG

09/30/2023

Verified buyer

Perfect fit for 2005xb , easy installation cheap price around $100 for the pair.

FAQS

No FAQs have been added for this product yet.