2010-2015 Chevrolet Camaro 3.6L/6.2L/7.0L | 4 PC Front Lower Control Arm | OE#20951301/RK621480 - PHILTOP

2010-2015 Chevrolet Camaro 3.6L/6.2L/7.0L | 4 PC Front Lower Control Arm | OE#20951301/RK621480 - PHILTOP

Corrosion Resistant

Deformation Resistant

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
42ISOCA2527US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Forward Control Arm Assembly - Driver Side - K621479 1x Front Lower Forward Control Arm Assembly - Passenger Side - K621478 1x Front Lower Rearward Control Arm Assembly - Driver Side - K621481 1x Front Lower Rearward Control Arm Assembly - Passenger Side - K621480
Quantity
4
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
20951301,20951300,92236898,92236899,92195441,92195445,92195442,92195444
Part Number
RK621480,RK621481,RK621478,RK621479,TC5653,TC5825,TC5824,TC5658,GS501128,GS501127,GS501129,GS501130,CB91283PR,CB91284PR,CB90114PR,CB90113PR,CK621480

Highlights

  • Fitment:PHILTOP Control Arms compatible with Chevrolet Camaro 2010-2015,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:1x Front Lower Forward Control Arm Assembly - Driver Side - K621479 + 1x Front Lower Forward Control Arm Assembly - Passenger Side - K621478 + 1x Front Lower Rearward Control Arm Assembly - Driver Side - K621481 + 1x Front Lower Rearward Control Arm Assembly - Passenger Side - K621480
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20152010 - 20152010 - 20152014 - 20152012 - 2015
MakeChevroletChevroletChevroletChevroletChevrolet
ModelCamaroCamaroCamaroCamaroCamaro
TrimLSLTSSZ/28ZL1
Engine3.6L V63.6L V66.2L V87.0L V86.2L V8
Note-----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Nancy_FirstCar_157

04/27/2026

These look fantastic on my Camaro! The metal feels high quality and the ball joints are smooth. Honestly, for what I paid, I was expecting less. This kit is a steal and makes the car handle like new. Highly recommend for the price.

CarGuy_John_631

02/19/2026

Super impressed with how fast this got here. The box was sturdy and all the parts were well protected. Had a small issue with tracking, but customer service sorted it out right away. They were really polite and efficient. Top notch service.

FAQS

No FAQs have been added for this product yet.