2010-2012 Ford Fusion 2.5L/3.0L | 8 PC Front Control Arm | OE#ES800874/K750415 - PHILTOP

2010-2012 Ford Fusion 2.5L/3.0L | 8 PC Front Control Arm | OE#ES800874/K750415 - PHILTOP

Corrosion Resistant

Deformation Resistant

4.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
49ISOCA1167US

Specifications

Brand
PHILTOP
Items Included
2x Front Inner Tie Rod Ends - EV800774 1x Front Driver Side Outer Tie Rod End - ES800798 1x Front Passenger Side Outer Tie Rod End - ES800797 2x Front Stabilizer Sway Bar End Link Driver and Passenger Side - K750415 2x Tie Rod Boots + Bellows W/Locking C-Clamps
Quantity
8
Position
Front
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
ES800874,MEOE190,MEOE191,MEOE192,AE5Z5K483A,AE5Z3A130C,AE5Z3280A,AE5Z3A130D
Part Number
K750415,ES800798,ES800797,EV800774,TA5040,TA5041,TA5188,TC5590,GS40674,TO85272PR,GS40673,TO85271PR,GS40744,GS40867,SL86205XL,SL86205PR

Highlights

  • Fitment:PHILTOP Control Arms compatible with Ford Fusion 2010-2012 3.0L/2.5L, compatible with Mercury Milan 2010-2011 3.0L/2.5L, compatible with Lincoln MKZ 2011-2012 2.5L,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:2x Front Inner Tie Rod Ends - EV800774 + 1x Front Driver Side Outer Tie Rod End - ES800798 + 1x Front Passenger Side Outer Tie Rod End - ES800797 + 2x Front Stabilizer Sway Bar End Link Driver and Passenger Side - K750415 + 2x Tie Rod Boots + Bellows w/Locking C-Clamps
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20122010 - 20122010 - 20122010 - 20122010 - 20122010 - 20122011 - 20122010 - 20112010 - 20112010 - 20112010 - 2011
MakeFordFordFordFordFordFordLincolnMercuryMercuryMercuryMercury
ModelFusionFusionFusionFusionFusionFusionMKZMilanMilanMilanMilan
TrimHybridSSESESELSELHybridBaseHybridPremierPremier
Engine2.5L L42.5L L42.5L L43.0L V62.5L L43.0L V62.5L L42.5L L42.5L L42.5L L43.0L V6
Note-----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.0/5

Based on 1 review

50%
4100%
30%
20%
10%

Mike from Texas_600

05/20/2026

Came pretty fast and was packed well. I did need some specific tools to get these installed, which I luckily had. Customer service was helpful though.

FAQS

No FAQs have been added for this product yet.

2010-2012 Ford Fusion Control Arm 8 PC Front | ES800874 | PHILTOP