PHILTOP Front Suspension Kit Lower Control Arm w/Ball Joint & Stabilizer Sway Bar End Link Compatible with Chevrolet Captiva

PHILTOP Front Suspension Kit Lower Control Arm w/Ball Joint & Stabilizer Sway Bar End Link Compatible with Chevrolet Captiva

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9480OCA004AUS

Specifications

Brand
PHILTOP
Items Included
1x Front Idler Arm [W/16mm Bolts] - K7225T 1x Front Pitman Arm - K7238 2x Front Adjusting Sleeves - ES2080S 2x Front Inner Tie Rod Ends - ES3171RLT 2x Front Lower Ball Joints - K7269 2x Front Outer Tie Rod Ends - ES3172RLT 2x Front Stabilizer Sway Bar End Links - K7275 2x Front Upper Ball Joints - K7206T
Quantity
14
Position
Front
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
52037583,52037667,52037674,52037661,52038587,52038589,52037570,52037584
Part Number
K7275,ES3172RLT,K7206T,ES3171RLT,K7206,MES3171RLT,K7269,MES3172RLT,K7238,MK7206T,K7225T,MK7269,ES3171RL,ES3172RL,TA5346,TA2212,JTE1544,GES3626S,GES3172RLT,T3172XL,534515,GK7238,PA7238RD,PA7238PR

Highlights

  • #54,647 in Automotive (See Top 100 in Automotive)
  • #111 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms w/Ball Joints compatible with Chevrolet Captiva Sport 2012-2015, Compatible with Saturn Vue 2008-2010, Compatible with Suzuki XL-7 2007-2009, Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:1x Front Lower Right Side Control Arm- 1x Front Lower Control Arm + Ball Joint - Driver Side - K620661; 1x Front Lower Control Arm + Ball Joint - Passenger Side - K621490; 1x Front Stabilizer / Sway Bar End Link - Driver Side - K750188; 1x Front Stabilizer / Sway Bar End Link- Passenger Side - K750189
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life.
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1994 - 19961994 - 19991994 - 19991994 - 19991994 - 19991994 - 19991994 - 1999
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodge
ModelRam 2500Ram 2500Ram 2500Ram 2500Ram 3500Ram 3500Ram 3500
TrimBaseBaseBaseBaseBaseBaseBase
Engine5.2L V85.9L L65.9L V88.0L V105.9L L65.9L V88.0L V10
Note
0.63Inch Bracket Holes;w/ 8800lb GVW
0.63Inch Bracket Holes;w/ 8800lb GVW
0.63Inch Bracket Holes;w/ 8800lb GVW
0.63Inch Bracket Holes;w/ 8800lb GVW
0.63Inch Bracket Holes;Independent Front Suspension
0.63Inch Bracket Holes;Independent Front Suspension
0.63Inch Bracket Holes;Independent Front Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.6/5

Based on 26 reviews

569%
419%
312%
20%
10%

RickFixIt_954

04/16/2026

These control arms and links feel really robust. The machining is precise, and they look like they'll last. Definitely a good bang for your buck compared to OEM parts.

SarahDrives_751

12/17/2025

My Captiva was pulling hard to one side, and these parts fixed it right up. It drives so much smoother now and the steering feels way more stable. Couldn't be happier with the results.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.