PHILTOP Front Suspension Kit Lower Control Arm w/Ball Joint & Stabilizer Sway Bar End Link Compatible with Chevrolet Captiva

PHILTOP Front Suspension Kit Lower Control Arm w/Ball Joint & Stabilizer Sway Bar End Link Compatible with Chevrolet Captiva

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5694OCA283HUS

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm + Ball Joint - Driver Side - K620661 1x Front Lower Control Arm + Ball Joint - Passenger Side - K621490 1x Front Stabilizer / Sway Bar End Link - Driver Side - K750188 1x Front Stabilizer / Sway Bar End Link- Passenger Side - K750189
Quantity
4
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
C96819161,96844891,96844892,15779960,15779961,4243078J00,4242078J00,25848407,25848408,25848405,25851970,25848406,25851969,4520278J02,25851971,4520278J01,4520178J02,4520278J00,96842652,4520178J00,96842653,25851972,4520178J01
Part Number
K750189,K750188,RK621490,RK620661,TC2346,CK620661

Highlights

  • #40,482 in Automotive (See Top 100 in Automotive)
  • #75 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms w/Ball Joints compatible with Chevrolet Captiva Sport 2012-2015, Compatible with Saturn Vue 2008-2010, Compatible with Suzuki XL-7 2007-2009, Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:1x Front Lower Right Side Control Arm- 1x Front Lower Control Arm + Ball Joint - Driver Side - K620661; 1x Front Lower Control Arm + Ball Joint - Passenger Side - K621490; 1x Front Stabilizer / Sway Bar End Link - Driver Side - K750188; 1x Front Stabilizer / Sway Bar End Link- Passenger Side - K750189
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life.
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20152013 - 201520122013 - 20152012200820092008 - 20092008 - 20102008 - 20102009 - 20102008 - 20102007 - 20082007 - 20092007 - 20092008 - 2009
MakeChevroletChevroletChevroletChevroletChevroletSaturnSaturnSaturnSaturnSaturnSaturnSaturnSuzukiSuzukiSuzukiSuzuki
ModelCaptiva SportCaptiva SportCaptiva SportCaptiva SportCaptiva SportVueVueVueVueVueVueVueXL-7XL-7XL-7XL-7
TrimLSLTLTLTZLTZGreen LineHybridRed LineXEXEXRXRBaseLimitedLuxuryPremium
Engine2.4L L42.4L L43.0L V62.4L L43.0L V62.4L L42.4L L43.6L V62.4L L43.5L V62.4L L43.6L V63.6L V63.6L V63.6L V63.6L V6
Note
w/ Sport Suspension
w/ Sport Suspension
w/ Sport Suspension
w/ Sport Suspension
w/ Sport Suspension
-----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.9/5

Based on 17 reviews

594%
46%
30%
20%
10%

Customer photos and videos

Mayor Mcturd

06/17/2025

Verified buyer

I won't have time to get these installed for who knows how long, but to my untrained eye they look well built. I like that they included a snap ring for the ball joint so that if they go out I should be able to just change the ball joint instead of the whole control arm again.

damiel brown

09/01/2025

Verified buyer

Everything works and it should. The quality and finish is good. No regrets so far after two months.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.