Front Suspension Kit Lower Control Arm w/Ball Joint Compatible with Ford Taurus Flex for Lincoln MKS MKT Police Inter...

Front Suspension Kit Lower Control Arm w/Ball Joint Compatible with Ford Taurus Flex for Lincoln MKS MKT Police Inter...

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
51ISOCA1437US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm W/Ball Joint - Driver Side - K622916 1x Front Lower Control Arm W/Ball Joint - Passenger Side - K622917
Quantity
2
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
MCF2395,FA5Z3078B,DA5Z3C339A,MCF2397,DA5Z3078B,DA5Z3078E,DA5Z3078C,FA5Z3078A,FA5Z3079A,DA5Z3079D,DA5Z3078A,DA5Z3078D,DA5Z3079A
Part Number
RK622917,RK622916,TC3975,MS401187

Highlights

  • Fitment:PHILTOP Control Arms compatible with Ford Taurus 2013-2019, Flex 2013-2015, Police Interceptor Sedan 2013-2019, Special Service Police Sedan 2014-2018; compatible with Lincoln MKT 2013-2015, MKS 2013,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:1x Front Lower Control Arm w/Ball Joint - Driver Side - K622916 + 1x Front Lower Control Arm w/Ball Joint - Passenger Side - K622917
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20152013 - 20152013 - 20152013 - 20192013 - 20192014 - 20182013 - 20172013 - 20192013 - 20172013 - 20192013 - 20172013 - 20192013 - 2019201320132013 - 20152013 - 20152013 - 20152013 - 20152013 - 20152013 - 2015
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordLincolnLincolnLincolnLincolnLincolnLincolnLincolnLincoln
ModelFlexFlexFlexPolice Interceptor SedanPolice Interceptor SedanSpecial Service Police SedanTaurusTaurusTaurusTaurusTaurusTaurusTaurusMKSMKSMKTMKTMKTMKTMKTMKT
TrimLimitedSESELBaseBaseBaseLimitedLimitedSESESELSELSHOBaseEcoBoostBaseBaseEcoBoostLimousineLiveryLivery
Engine3.5L V63.5L V63.5L V63.5L V63.7L V62.0L L42.0L L43.5L V62.0L L43.5L V62.0L L43.5L V63.5L V63.7L V63.5L V62.0L L43.7L V63.5L V63.5L V62.0L L43.7L V6
Note
To 03/16/2015
To 03/16/2015
To 03/16/2015
------------
To 01/18/2015
To 01/18/2015
To 01/18/2015
To 01/18/2015
To 01/18/2015
To 01/18/2015

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Mike from Texas_253

12/09/2025

Came really fast and was packaged well. Customer service was great when I reached out with a question. They were very responsive and helpful.

Chris_GearHead_870

03/30/2026

Arrived super quick and was packed up nicely. Had a question for customer service and they were really helpful and friendly. Top notch support.

FAQS

No FAQs have been added for this product yet.