2010-2015 Chevrolet Camaro 3.6L V6/6.2L V8 | 10 PC Front Lower Control Arm | 22757042/ES800939 - PHILTOP

2010-2015 Chevrolet Camaro 3.6L V6/6.2L V8 | 10 PC Front Lower Control Arm | 22757042/ES800939 - PHILTOP

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
88ISOCA2537US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Forward Control Arm Assembly - Driver Side - K621479 1x Front Lower Forward Control Arm Assembly - Passenger Side - K621478 1x Front Lower Rearward Control Arm Assembly - Driver Side - K621481 1x Front Lower Rearward Control Arm Assembly - Passenger Side - K621480 1x Front Sway Bar End Link - Driver Side - K750553 1x Front Sway Bar End Link - Passenger Side - K750552 2x Outer Tie Rod End - Driver and Passenger Side - ES800939 2x Inner Tie Rod Ends - EV800885
Quantity
10
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
22757042,22757043,92241266,20951301,20951300,92227430,92236898,92236899,92195441,92195445,92195442,92195444,92243928,92243929
Part Number
ES800939,K750552,K750553,EV800885,RK621480,RK621481,RK621478,RK621479,TC5653,TC5825,TC5824,TC5658,TC5304,TC5303,TA5463,TA5303,GS501128,GS501127,GS501129,GS501130,GS508105,CB91283PR,CB91284PR,CB90114PR,CB90113PR,CK621480,JTS1336,GS50650,TO91375XL,531965,GS50741,TI91190PR,TI91190,531941,JTS1333,SL90052PR,SL90022XL,SL90022,SL90021

Highlights

  • Fitment:PHILTOP Control Arms compatible with Chevrolet Camaro 2010-2011, 2012-2015 3.6L, 2012 6.2L 2013 2014,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:2x Front Lower Forward Control Arm Assembly - Driver/Passenger Side - K621479/K621478 1x Front Lower Rearward Control Arm Assembly - Driver Side - K621481 1x Front Lower Rearward Control Arm Assembly - Passenger Side - K621480 1x Front Sway Bar End Link - Driver Side - K750553 1x Front Sway Bar End Link - Passenger Side - K750552 2x Outer Tie Rod End - Driver and Passenger Side - ES800939 2x Inner Tie Rod Ends - EV800885
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 201120122013 - 20152010 - 201120122013 - 20152010 - 2012
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevrolet
ModelCamaroCamaroCamaroCamaroCamaroCamaroCamaro
TrimLSLSLSLTLTLTSS
Engine3.6L V63.6L V63.6L V63.6L V63.6L V63.6L V66.2L V8
Note-
Design Allows Easier Installation
--
Design Allows Easier Installation
--

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Jennifer_Auto_323

05/16/2026

Super fast shipping, and everything was packaged so carefully. I had to contact customer service, and they were incredibly responsive and helpful. Really impressed.

Mike from Texas_149

03/30/2026

Putting these on was way easier than I thought it would be. They fit perfectly and feel super solid. Much better than that other set I tried last year.

FAQS

No FAQs have been added for this product yet.