2013-2018 Ford Police Interceptor Utility 3.5L V6 | 10 PC Front Lower Control Arm | MEF350/K750616 - PHILTOP

2013-2018 Ford Police Interceptor Utility 3.5L V6 | 10 PC Front Lower Control Arm | MEF350/K750616 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
94ISOCA1877US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm W/ Ball Joint Assembly - Driver Side - K622216 1x Front Lower Control Arm W/ Ball Joint Assembly - Passenger Side - K622215 2x Front Outer Tie Rod Ends - Driver & Passenger Side - ES800952 2x Front Inner Tie Rod Ends - Driver & Passenger Side - EV800893 1x Front Stabilizer / Sway Bar End Link - Passenger Side - K750616 1x Front Stabilizer / Sway Bar End Link - Driver Side - K750617 1x Rear Sway Bar Link - Driver Side - K750393 1x Rear Sway Bar Link - Passenger Side - K750394
Quantity
10
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
MEF350,MEF24,MEF351,BB5Z3079A,BB5Z3079B,GB5Z3078D,GB5Z3079G,BB5Z5K484A,BB5Z5K483A,GB5Z5K484A,GB5Z5K483A,GB5Z3078C,BB5Z3A130B,BB5Z3280A,GB5Z3079E,GB5Z3078E,GB5Z3079J,GB5Z3079H,DG1Z5K484B,DG1Z5K484A,AA8Z5K484A
Part Number
K750616,K750617,RK622215,RK622216,ES800952,EV800893,K750393,K750394,TC5302,TC5301,SL85232PR,SL85231PR,GS40862,GS40861

Highlights

  • Fitment:PHILTOP Control Arms compatible with Ford Explorer 2011-2016, 2018, 2017 3.5L/2.3T/3.5T, Police Interceptor Utility 2013-2018,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:2x Front Lower Control Arm w/ Ball Joint Assembly - Driver/Passenger Side - K622216/K622215 2x Front Outer Tie Rod Ends - Driver & Passenger Side - ES800952 2x Front Inner Tie Rod Ends - Driver & Passenger Side - EV800893 1x Front Stabilizer / Sway Bar End Link - Passenger Side - K750616 1x Front Stabilizer / Sway Bar End Link - Driver Side - K750617 1x Rear Sway Bar Link - Driver Side - K750393 1x Rear Sway Bar Link - Passenger Side - K750394
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20152016 - 20182011 - 20182012 - 20152016 - 20182011 - 20182016 - 20182013 - 20182012 - 20152016 - 20182011 - 20182014 - 20182013 - 2018
MakeFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerPolice Interceptor UtilityPolice Interceptor Utility
TrimBaseBaseBaseLimitedLimitedLimitedPlatinumSportXLTXLTXLTBaseBase
Engine2.0L L42.3L L43.5L V62.0L L42.3L L43.5L V63.5L V63.5L V62.0L L42.3L L43.5L V63.5L V63.7L V6
Note-------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.3/5

Based on 4 reviews

550%
425%
325%
20%
10%

Kelly_SUV_Life_991

03/20/2026

Super fast shipping, arrived way ahead of schedule. Everything was securely packaged, no damage at all. Customer service was awesome, answered my emails right away and were super helpful.

Rob_HomeGarage_456

01/27/2026

These look great, really well-made components. You can tell they're built to last. For the price, it's an absolute steal. My truck rides like new again.

FAQS

No FAQs have been added for this product yet.