2000-2002 Dodge Ram 2500 5.9L/8.0L | 12 PC Front Control Arm | OE#52106678AA/K7345 - PHILTOP

2000-2002 Dodge Ram 2500 5.9L/8.0L | 12 PC Front Control Arm | OE#52106678AA/K7345 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
67ISOCA2477US

Specifications

Brand
PHILTOP
Items Included
2x Front Inner Tie Rods - Driver & Passenger Side - ES3539 2x Front Outer Tie Rods - Driver & Passenger Side - ES3540 1x Front Idler Arm - K7347 1x Front Pitman Arm - K7345 1x Front Outer Tie Rod Adjustment Sleeve (Right) - ES2079 1x Front Outer Tie Rod Adjustment Sleeve (Left) - ES2080 2x Front Upper Ball Joints - Driver & Passenger Side - K7366 2x Front Lower Ball Joints - Driver & Passenger Side - K7369
Quantity
12
Position
Front
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
52106678AA,5017670AA,5017671AA,52113678AA
Part Number
K7345,K7366,K7347,ES3540,ES3539,K7369,MES3540,MES3539,MK7369,MK7366,TC5935,B7366,CB82005PR,CB82005,GK7366

Highlights

  • Fitment:PHILTOP Control Arms compatible with Dodge Ram 2500 2000-2002 5.9T/5.9L/8.0L, compatible with Dodge Ram 3500 2000-2002 5.9T/5.9L/8.0L
  • Suspension Kit Includes:2x Front Inner Tie Rods - Driver & Passenger Side - ES3539;2x Front Outer Tie Rods - Driver & Passenger Side - ES3540;1x Front Idler Arm - K7347;1x Front Pitman Arm - K7345;1x Front Outer Tie Rod Adjustment Sleeve (Right) - ES2079;1x Front Outer Tie Rod Adjustment Sleeve (Left) - ES2080;2x Front Upper Ball Joints - Driver & Passenger Side - K7366;2x Front Lower Ball Joints - Driver & Passenger Side - K7369
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2000 - 20022000 - 20022000 - 20022000 - 20022000 - 20022000 - 2002
MakeDodgeDodgeDodgeDodgeDodgeDodge
ModelRam 2500Ram 2500Ram 2500Ram 3500Ram 3500Ram 3500
TrimBaseBaseBaseBaseBaseBase
Engine5.9L L65.9L V88.0L V105.9L L65.9L V88.0L V10
Note
w/ Independent Front Suspension
w/ Independent Front Suspension
w/ Independent Front Suspension
w/ Independent Front Suspension
w/ Independent Front Suspension
w/ Independent Front Suspension

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

5.0/5

Based on 7 reviews

5100%
40%
30%
20%
10%

Thomas Wright

09/02/2026

Verified buyer

Worked great for my 2002 dodge ram 2500.

CarGuy_John_291

03/10/2026

Got here faster than I thought it would! The packaging was excellent, everything sealed up tight. When I called with a question, the rep was super knowledgeable and resolved it quickly. Great service all around.

FAQS

No FAQs have been added for this product yet.