2006-2010 Ford Explorer 4.0L V6/4.6L V8 | 10 PC Front Upper Control Arm | OE#MEOE222/K7275 - PHILTOP

2006-2010 Ford Explorer 4.0L V6/4.6L V8 | 10 PC Front Upper Control Arm | OE#MEOE222/K7275 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
45ISOCA2057US

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Control Arm and Pre-Assembled Ball Joint (Driver) - K80723 1x Front Upper Control Arm and Pre-Assembled Ball Joint (Passenger) - K80722 2x Front Suspension Lower Ball Joint - K80771 2x Front Stabilizer / Sway Bar End Link - K7275 2x Front Outer Tie Rod End Link - ES80786 2x Front Inner Tie Rod End Link - EV800278
Quantity
10
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
MEOE26,6L2C3280AE,MEOE222,6L2Z3085AA,6L2Z3084AA,7L2Z3050A,7L5Z3050A,6L5Z3050AA,AL2Z3A130A,6L2Z3A130AA,6L2Z3280A,7L2Z3280A
Part Number
K7275,K80771,ES80786,EV800278,RK80722,RK80723,TC7691,TC6139,TA5276,TA5185,CK80722,CK80723,GK80722,GK80723,K500014,CB85058,CB85058PR,CB85057PR,BJ85026,CB85057,K200356,BJ85026XL,GES80786,TO85335XL,535000,TI85400XL,GS40700,BC851029PR,BC851029,531776

Highlights

  • Fitment:PHILTOP Control Arms compatible with Ford Explorer 2006-2010, Explorer Sport Trac 2007-2010, compatible with Mercury Mountaineer 2006-2010,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:1x Front Upper Control Arm and Pre-Assembled Ball Joint (Driver) - K80723 + 1x Front Upper Control Arm and Pre-Assembled Ball Joint (Passenger) - K80722 + 2x Front Suspension Lower Ball Joint - K80771 + 2x Front Stabilizer / Sway Bar End Link - K7275 + 2x Front Outer Tie Rod End Link - ES80786 + 2x Front Inner Tie Rod End Link - EV800278
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2006 - 20102006 - 20102006 - 20102006 - 201020062006 - 20102006 - 20102007 - 20102007 - 20102007 - 20102007 - 20102007 - 20102006200620062007 - 20102006 - 2010
MakeFordFordFordFordFordFordFordFordFordFordFordMercuryMercuryMercuryMercuryMercuryMercury
ModelExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorer Sport TracExplorer Sport TracExplorer Sport TracExplorer Sport TracMountaineerMountaineerMountaineerMountaineerMountaineerMountaineer
TrimEddie BauerEddie BauerLimitedLimitedXLSXLTXLTLimitedLimitedXLTXLTBaseConvenienceLuxuryLuxuryPremierPremier
Engine4.0L V64.6L V84.0L V64.6L V84.0L V64.0L V64.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.0L V64.0L V64.6L V84.0L V64.6L V8
Note
From 07/19/2005
From 07/19/2005
From 07/19/2005
From 07/19/2005
From 07/19/2005
From 07/19/2005
From 07/19/2005
----
From 07/19/2005
From 07/19/2005
From 07/19/2005
From 07/19/2005
From 07/19/2005
From 07/19/2005

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Nancy_FirstCar_980

01/03/2026

Super speedy delivery, got here faster than promised. Everything was packed really well, no dings or scratches. The team on the phone was super helpful and answered all my questions.

Ashley_RoadTrip_215

04/21/2026

Putting this kit on was way easier than I expected. All the parts fit perfectly without any fuss. Much better than the last set I bought from another place, those were a nightmare.

FAQS

No FAQs have been added for this product yet.

2006-2010 Ford Explorer Control Arm 10 PC Front Upper MEOE222 | PHILTOP