2002-2005 Ford Explorer 4.0L V6/4.6L V8 | 6 PC Front Upper Control Arm | F57Z3050BB/K7275 - PHILTOP

2002-2005 Ford Explorer 4.0L V6/4.6L V8 | 6 PC Front Upper Control Arm | F57Z3050BB/K7275 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
79ISOCA1367US

Specifications

Brand
PHILTOP
Items Included
1x Front Left Upper Control Arm Assembly - K620224 1x Front Right Upper Control Arm Assembly - K620225 2x Front Lower Ball Joints - K8695 2x Front Sway Bar End Links - K7275
Quantity
6
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
F57Z3050BB,1L2Z3084AA,1L2Z3085AA
Part Number
K7275,K8695,K8695T,MK8695T,RK620225,RK620224

Highlights

  • Fitment:PHILTOP Control Arms compatible with Ford Explorer 2002-2005 4.6L/4.0L, compatible with Mercury Mountaineer 2002-2005,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:1x Front Left Upper Control Arm Assembly - K620224 + 1x Front Right Upper Control Arm Assembly - K620225 + 2x Front Lower Ball Joints - K8695 + 2x Front Sway Bar End Links - K7275
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20052002 - 20052002 - 20052002 - 2005200420042002 - 20052004 - 20052002 - 20052002 - 20052004 - 20052004 - 20052002 - 20042002 - 200420052005200520052004 - 20052004 - 2005
MakeFordFordFordFordFordFordFordFordFordFordFordFordMercuryMercuryMercuryMercuryMercuryMercuryMercuryMercury
ModelExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerExplorerMountaineerMountaineerMountaineerMountaineerMountaineerMountaineerMountaineerMountaineer
TrimEddie BauerEddie BauerLimitedLimitedNBXNBXXLSXLS SportXLTXLTXLT SportXLT SportBaseBaseConvenienceConvenienceLuxuryLuxuryPremierPremier
Engine4.0L V64.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.0L V64.0L V64.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.6L V84.0L V64.6L V8
Note--------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

5.0/5

Based on 4 reviews

5100%
40%
30%
20%
10%

Emma_DailyCommute_15

12/14/2025

These parts look like they came straight from the factory, really solid construction. For the price, I was expecting less, but these are a fantastic deal. Highly recommend!

Chris_GearHead_78

12/23/2025

Arrived super fast and the packaging was top-notch, no dings or scratches. Had a quick question about one part and customer service was on the ball, super helpful!

FAQS

No FAQs have been added for this product yet.