2006-2007 Jeep Liberty 3.7L V6/2.8L L4 | 10 PC Front Upper Control Arm | K52125484AA/ES3536 - PHILTOP

2006-2007 Jeep Liberty 3.7L V6/2.8L L4 | 10 PC Front Upper Control Arm | K52125484AA/ES3536 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
88ISOCA0217US

Specifications

Brand
PHILTOP
Items Included
2x Front Upper Control Arm W/Ball Joint - K3198 2x Front Lower Ball Joint - K80767 2x Front Sway Bar Link - K7391 1x Front Outer Tie Rod Driver Side - ES3535 1x Front Outer Tie Rod Passenger Side - ES3536 2x Front Inner Tie Rod End Link - EV800416
Quantity
10
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
K52125484AA,K52125483AA,52088632AA,52088632AB,52088632AC,52088632AD,5069161AB,5072445AA,52088662AB,5072444AA,68068615AB,68068615AA,52128521AA,5114037AC,52109970AA,52128520AA,5114037AI,5069161AA,5114037AH,68003671AA,5114037AE,5114037AD,52125484AA,52125483AA,5189419AA,5114037AJ
Part Number
ES3536,ES3535,K7391,K80767,EV800416,RK3198,MK80767,MES3535,MK7391,MES3536,TC5154,TC5644,TA3149,TA3150,GK3198,ES800087,ES800088,GES3536,CB3198PR,GK7391,GES3535,535947,JTE916,TO96265,TO96041,T3535XL,JTE917,TO96042PR,TO96042,T3536XL

Highlights

  • Fitment:PHILTOP Control Arms compatible with Jeep Liberty 2006-2007,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:2x Front Upper Control Arm w/Ball Joint - K3198 + 2x Front Lower Ball Joint - K80767 + 2x Front Sway Bar Link - K7391 + 1x Front Outer Tie Rod Driver Side - ES3535 + 1x Front Outer Tie Rod Passenger Side - ES3536 + 2x Front Inner Tie Rod End Link - EV800416
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200620062006 - 2007200620062006 - 2007
MakeJeepJeepJeepJeepJeepJeep
ModelLibertyLibertyLibertyLibertyLibertyLiberty
Trim65th Anniversary EditionLimitedLimitedRenegadeSportSport
Engine3.7L V62.8L L43.7L V63.7L V62.8L L43.7L V6
Note------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Rob_HomeGarage_450

06/21/2026

Wow, these look fantastic and feel extremely durable. For the price, this is an amazing deal. My SUV's handling is night and day better.

Kelly_SUV_Life_695

10/17/2025

This kit was a lifesaver. Installation was much simpler than I anticipated, and all the parts fit like a glove. My truck feels incredibly stable now.

FAQS

No FAQs have been added for this product yet.