1998-2002 Mercury Grand Marquis 4.6L V8 | 16 PC Front/Rear Control Arm | OE#1W1Z3355AA/K8848 - PHILTOP

1998-2002 Mercury Grand Marquis 4.6L V8 | 16 PC Front/Rear Control Arm | OE#1W1Z3355AA/K8848 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
97ISOCA0277US

Specifications

Brand
PHILTOP
Items Included
2x Front Stabilizer/Sway Bar Link - K8953 2x Rear Stabilizer/Sway Bar End Link - K8848 2x Front Upper Ball Joint - K8678 2x Front Lower Ball Joint - K8685 1x Front Pitman Arm - K8688 1x Front Idler Arm - K8283 2x Front Inner Tie Rod End - ES3494 2x Front Outer Tie Rod End - ES3495 2x Front Tie Rod Adjusting Sleeve - ES3311S
Quantity
16
Position
Front、Rear
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
MEOE60,1W1Z3355AA,9W1Z3V590A,MCS190144,F8AZ3590AA,F5AZ3590A,D9AZ3355A,E9AZ3355A,F8AZ3050AA,2W7Z3050AA,2W7Z3A130A,2W7Z3A131AA,F8AC3B438AB,F5AZ3049A,F7AZ3049AA,F8AZ5K484AA,2W7Z3A130AA,2W7Z3A131A
Part Number
K8848,ES3494,ES3495,K8283,K8688,K8953,K8685,K8678,MK8678,MK8685,MES3494,MK8953,MES3495,TA2267,TA2139,TA2408,GES3495,GK8283,IA85499XL,GK8688,PA8688XL

Highlights

  • Fitment:PHILTOP Control Arms compatible with Mercury Grand Marquis 1998 1999 2000 2001 2002, compatible with Lincoln Town Car 2000-2002, 1998-1999 4.6L, compatible with Ford Crown Victoria 1998-2002,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:2x Front Stabilizer/Sway Bar Link - K8953 + 2x Rear Stabilizer/Sway Bar End Link - K8848 + 2x Front Upper Ball Joint - K8678 + 2x Front Lower Ball Joint - K8685 + 1x Front Pitman Arm - K8688 + 1x Front Idler Arm - K8283 + 2x Front Inner Tie Rod End - ES3494 + 2x Front Outer Tie Rod End - ES3495 + 2x Front Tie Rod Adjusting Sleeve - ES3311S
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1998 - 200220021998 - 20021998 - 20021998 - 20021998 - 19991998 - 20022001 - 20021998 - 20022001 - 20021998 - 20021998 - 20021998 - 2002
MakeFordFordFordFordFordLincolnLincolnLincolnLincolnLincolnLincolnMercuryMercury
ModelCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaCrown VictoriaTown CarTown CarTown CarTown CarTown CarTown CarGrand MarquisGrand Marquis
TrimBaseLWBLXPolice InterceptorSBaseCartierCartier LExecutiveExecutive LSignatureGSLS
Engine4.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V84.6L V8
Note-------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.3/5

Based on 4 reviews

550%
425%
325%
20%
10%

Nancy_FirstCar_621

06/04/2026

Got here really fast, and the box was in great shape. Had a question about one of the components, and customer service was super helpful and friendly. Very happy with the whole process.

Mike from Texas_842

12/31/2025

This kit looks really professional and the parts feel heavy-duty. Honestly, for the price, the quality is amazing. Totally worth every penny.

FAQS

No FAQs have been added for this product yet.