1994-1999 Dodge Ram 1500 3.9L V6/5.2L V8/5.9L V8 | 10 PC Front Control Arm | OE#52037583/ES3172RLT - PHILTOP

1994-1999 Dodge Ram 1500 3.9L V6/5.2L V8/5.9L V8 | 10 PC Front Control Arm | OE#52037583/ES3172RLT - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
17ISOCA2467US

Specifications

Brand
PHILTOP
Items Included
1x Front Idler Arm - K7217T 1x Front Pitman Arm - K7239 2x Front Lower Ball Joints - K7271 2x Front Upper Ball Joints - K7206T 2x Front Inner Tie Rod Ends - ES3171 2x Front Outer Tie Rod Ends - ES3172
Quantity
10
Position
Front
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
52037583,4147437,52037667,52038407,52038728,52037674,52037660,52038725,52037623,52037406,52037570,52037624,52037584
Part Number
ES3172RLT,K7206T,ES3171RLT,K7271,K7239,K7206,K7217T,MES3171RLT,MES3172RLT,MK7206T,MK7271,ES3171RL,ES3172RL,TA5346,TA2542,TL499,GK7239,JTE1544,GES3626S,GES3172RLT,T3172XL,534515,GK7217T,IA7217PR,PA7239RD,PA7239PR

Highlights

  • Fitment:PHILTOP Control Arms compatible with Dodge Ram 1500 1994-1999 5.9L/3.9L/5.2L,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:1x Front Idler Arm - K7217T + 1x Front Pitman Arm - K7239 + 2x Front Lower Ball Joints - K7271 + 2x Front Upper Ball Joints - K7206T + 2x Front Inner Tie Rod Ends - ES3171 + 2x Front Outer Tie Rod Ends - ES3172
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1994 - 19961994 - 19961994 - 19961997199719971997 - 19991997 - 19991997 - 19991997 - 19981997 - 19991997 - 19991997 - 19991997 - 19991997 - 19991997 - 19991997 - 1999
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
ModelRam 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500Ram 1500
TrimBaseBaseBaseLTLTLTLaramieLaramieLaramieSS/T 5.9LSTSTSTSportSportSportWS
Engine3.9L V65.2L V85.9L V83.9L V65.2L V85.9L V83.9L V65.2L V85.9L V85.9L V83.9L V65.2L V85.9L V83.9L V65.2L V85.9L V83.9L V6
Note-----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.8/5

Based on 8 reviews

575%
425%
30%
20%
10%

Nancy_FirstCar_990

02/27/2026

This was a pretty easy install, all things considered. I've done this job on other cars and this was one of the smoother ones. Good fitment.

Lisa_CivicDriver_675

10/08/2025

Great value here, the kit has everything you need and the quality is impressive. My truck handles like new again. Definitely recommend this.

FAQS

No FAQs have been added for this product yet.