1997-2006 Jeep Wrangler 4.0L/2.4L/2.5L | 4 PC Front Upper Lower Control Arm | OE#52059622AB/RK640734 - PHILTOP

1997-2006 Jeep Wrangler 4.0L/2.4L/2.5L | 4 PC Front Upper Lower Control Arm | OE#52059622AB/RK640734 - PHILTOP

Corrosion Resistant

Deformation Resistant

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
56ISOCA1327US

Specifications

Brand
PHILTOP
Items Included
2x Front Upper Control Arm Assembly - K620244 2x Front Lower Control Arm Assembly - K640734
Quantity
4
Position
Front Upper、Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
52059622AB,52059655AB,52059655AA,52088654AB,52088654
Part Number
RK640734,SK620244,TC6197,GS25187,CA96075PR,JTC2751,CK640734

Highlights

  • Fitment:PHILTOP Control Arms compatible with Jeep Wrangler 1997-2006,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:2x Front Upper Control Arm Assembly - K620244 + 2x Front Lower Control Arm Assembly - K640734
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20062003 - 20062003 - 20061997 - 20022005 - 20061997 - 20041997 - 20062004 - 20062005 - 20062002 - 2006
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWranglerWrangler
Trim65th Anniversary EditionRubiconSESESESaharaSportUnlimitedUnlimited RubiconX
Engine4.0L L64.0L L62.4L L42.5L L44.0L L64.0L L64.0L L64.0L L64.0L L64.0L L6
Note
Includes Bushings
Includes Bushings
Includes Bushings
Includes Bushings
Includes Bushings
Includes Bushings
Includes Bushings
Includes Bushings
Includes Bushings
Includes Bushings

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

DIY_Karen_584

06/25/2026

These look fantastic! The finish is consistent and they feel very robust. Considering the price, the quality is outstanding. My Jeep feels so much more stable on the road now. Great bang for your buck.

Steve_DIYer_474

02/10/2026

Installation on my TJ was a breeze. These parts are well-made and fit perfectly, just like the factory ones but at a fraction of the cost. My steering feels tighter and more responsive now. Definitely a good buy.

FAQS

No FAQs have been added for this product yet.

1997-2006 Jeep Wrangler Control Arm 4 PC Front Upper Lower | 52059622AB | PHILTOP