
2002-2005 Dodge Ram 1500 3.7L V6 | 8 PC Front Upper Control Arm | OE#52106577AA/K7411 - PHILTOP
Ball Joint Included
Corrosion Resistant
Deformation Resistant
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 2554CAK312PUS
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2003 | 2003 - 2004 | 2003 - 2005 | 2003 | 2002 - 2003 | 2002 - 2005 | 2003 - 2005 | 2002 - 2003 | 2004 - 2005 | 2002 - 2005 | 2002 - 2005 | 2003 - 2005 | 2002 - 2003 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Make | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge | Dodge |
| Model | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 | Ram 1500 |
| Trim | Laramie | Laramie | Laramie | Laramie | SLT | SLT | SLT | SLT | SRT-10 | ST | ST | ST | ST |
| Engine | 3.7L V6 | 4.7L V8 | 5.7L V8 | 5.9L V8 | 3.7L V6 | 4.7L V8 | 5.7L V8 | 5.9L V8 | 8.3L V10 | 3.7L V6 | 4.7L V8 | 5.7L V8 | 5.9L V8 |
| Note | - | - | - | - | - | - | - | - | - | - | - | - | - |
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the installation side, mounting points and ball-joint configuration.
- Inspect the new control arm, bushings, ball joint and dust boot for damage.
- Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
- Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
- Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
- Step-1: Raise and support the vehicle, then remove the wheel.
- Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
- Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
- Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
- Step-5: Position the new arm and hand-start all fasteners.
- Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
- Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
- Confirm all fasteners and locking components are secure.
- Check that the wheel rotates freely without interference.
- Perform a short, low-speed road test and check for noise, pulling or unstable steering.
- A professional four-wheel alignment is required after installation.
- Recheck the installation after the first 50–100 km.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2002-2005 Dodge Ram 1500 3.7L V6 | 8 PC Front Upper Control Arm | OE#52106577AA/K7411 - PHILTOP
Ball Joint Included
Corrosion Resistant
Deformation Resistant
- SKU:
- 2554CAK312PUS
$132.51
Check if this fits your vehicle
Select a vehicle to check this product.
- Items Included
- 2x Front Upper Control Arm W/ Ball Joint Assembly - K7424 2x Front Sway Bar End Link - K7400 2x Front Lower Ball Joint - K7411 2x Front Outer Tie Rod End - ES3538
- Quantity
- 8
- Position
- Front Upper
- Surface Finish
- Chrome
- Material
- Steel
- Warranty Period
- 2-Year
- #77,759 in Automotive (See Top 100 in Automotive)
- #165 in Automotive Replacement Control Arms
- Fitment: PHILTOP control arms compatible with Ram 1500 2003-2005 5.7L, Ram 1500 2002-2005 4.7L, Ram 1500 2002-2003 5.9L, Ram 1500 2002-2005 3.7L, Ram 1500 2004-2005 8.3L. Please check fitment for accurate information before purchasing
- Kit Includes: 2x Front Upper Control Arm w/ Ball Joint Assembly - K7424, 2x Front Sway Bar End Link - K7400, 2x Front Lower Ball Joint - K7411, 2x Front Outer Tie Rod End - ES3538
- OE Number: Control Arms for K7424 K7400 K7411 ES3538
- Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
- Durable Design: PHILTOP Control Arms are made of high quality material which meets or exceeds OEM standard. They ensure long - lasting performance, reducing the need for frequent replacements. This not only saves you money on maintenance costs but also provides peace of mind, knowing your vehicle's handling and safety are supported by reliable, enduring components
0.0
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2003 | Dodge | Ram 1500 | Laramie | 3.7L V6 | - |
| 2003 - 2004 | Dodge | Ram 1500 | Laramie | 4.7L V8 | - |
| 2003 - 2005 | Dodge | Ram 1500 | Laramie | 5.7L V8 | - |
| 2003 | Dodge | Ram 1500 | Laramie | 5.9L V8 | - |
| 2002 - 2003 | Dodge | Ram 1500 | SLT | 3.7L V6 | - |
| 2002 - 2005 | Dodge | Ram 1500 | SLT | 4.7L V8 | - |
| 2003 - 2005 | Dodge | Ram 1500 | SLT | 5.7L V8 | - |
| 2002 - 2003 | Dodge | Ram 1500 | SLT | 5.9L V8 | - |
| 2004 - 2005 | Dodge | Ram 1500 | SRT-10 | 8.3L V10 | - |
| 2002 - 2005 | Dodge | Ram 1500 | ST | 3.7L V6 | - |
| 2002 - 2005 | Dodge | Ram 1500 | ST | 4.7L V8 | - |
| 2003 - 2005 | Dodge | Ram 1500 | ST | 5.7L V8 | - |
| 2002 - 2003 | Dodge | Ram 1500 | ST | 5.9L V8 | - |
Product Specifications
- Brand
- PHILTOP
- Items Included
- 2x Front Upper Control Arm W/ Ball Joint Assembly - K7424 2x Front Sway Bar End Link - K7400 2x Front Lower Ball Joint - K7411 2x Front Outer Tie Rod End - ES3538
- Quantity
- 8
- Position
- Front Upper
- Surface Finish
- Chrome
- Material
- Steel
- Warranty Period
- 2-Year
- OE Number
- 52106577AA,5072958AB,52106577AB,5073582AA,52106577AF,52106577AE,5072958AC,52106577AH,5073582AC,5073582AB,5072958AA,5073582AD,5072934AE,5072934AC,5072934AD
- Part Number
- K7411,ES3538,K7400,RK7424,MK7411,MES3538,MK7400,TC5385,GK7411,JBJ1207,BJ82275XL
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the installation side, mounting points and ball-joint configuration.
- Inspect the new control arm, bushings, ball joint and dust boot for damage.
- Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
- Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
- Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
- Step-1: Raise and support the vehicle, then remove the wheel.
- Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
- Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
- Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
- Step-5: Position the new arm and hand-start all fasteners.
- Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
- Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
- Confirm all fasteners and locking components are secure.
- Check that the wheel rotates freely without interference.
- Perform a short, low-speed road test and check for noise, pulling or unstable steering.
- A professional four-wheel alignment is required after installation.
- Recheck the installation after the first 50–100 km.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.