2002-2004 Jeep Liberty 3.7L/2.4L | 4 PC Front Upper Control Arm | OE#5114037AC/K3199 - PHILTOP

2002-2004 Jeep Liberty 3.7L/2.4L | 4 PC Front Upper Control Arm | OE#5114037AC/K3199 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
89ISOCA0207US

Specifications

Brand
PHILTOP
Items Included
2x Front Lower Ball Joints - K3199 2x Front Upper Control Arms and Ball Joints Assembly - K3198
Quantity
4
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
5114037AC,5069161AA,5114037AH,5114037AE,5114037AD,5114037AJ,05114037AI,52088632AA,52088632AB,52088632AC,52088632AD,5069161AB,68068615AB,68068615AA,5114037AB
Part Number
K3199,RK3198,MK3199,TC5127,TC5154,K80767,GK3198,MK80767,CB3198PR,GK3199,JBJ968,BJ96095,B3199XL,BJ86095

Highlights

  • #21,792 in Automotive (See Top 100 in Automotive)
  • #37 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms compatible with Jeep Liberty 2002 2003 2004,Please check fitment for accurate information before purchasing
  • Suspension Kit Includes:2x Front Lower Ball Joints - K3199 + 2x Front Upper Control Arms and Ball Joints Assembly - K3198
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life.
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20042002 - 20042002 - 20042002 - 2004
MakeJeepJeepJeepJeep
ModelLibertyLibertyLibertyLiberty
TrimLimitedRenegadeSportSport
Engine3.7L V63.7L V62.4L L43.7L V6
Note
Includes A Larger Stud Taper Diameter For A Proper Fit
Includes A Larger Stud Taper Diameter For A Proper Fit
Includes A Larger Stud Taper Diameter For A Proper Fit
Includes A Larger Stud Taper Diameter For A Proper Fit

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.5/5

Based on 4 reviews

575%
40%
325%
20%
10%

Tom_Handy_110

10/08/2025

This kit was a good replacement for my old suspension. Installation was manageable, and the parts fit well. My Liberty feels much more stable and handles better now. Definitely a worthwhile upgrade.

Steve_DIYer_538

05/12/2026

Super fast shipping, arrived in just a couple of days. All the parts were well-packaged and protected. I called customer service with a quick question about installation, and they were really helpful and polite. Great service.

FAQS

No FAQs have been added for this product yet.