
1999-2004 Jeep Grand Cherokee 4.0L L6 | 6 PC Front Upper Lower Control Arm | OE#52088355AB/RK641869 - PHILTOP
Corrosion Resistant
Deformation Resistant
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 7249CAK075TUS
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 1999 - 2004 | 1999 - 2004 | 1999 - 2004 | 1999 - 2004 | 2002 - 2004 | 2004 | 2004 | 2002 | 2002 |
|---|---|---|---|---|---|---|---|---|---|
| Make | Jeep | Jeep | Jeep | Jeep | Jeep | Jeep | Jeep | Jeep | Jeep |
| Model | Grand Cherokee | Grand Cherokee | Grand Cherokee | Grand Cherokee | Grand Cherokee | Grand Cherokee | Grand Cherokee | Grand Cherokee | Grand Cherokee |
| Trim | Laredo | Laredo | Limited | Limited | Overland | Special Edition | Special Edition | Sport | Sport |
| Engine | 4.0L L6 | 4.7L V8 | 4.0L L6 | 4.7L V8 | 4.7L V8 | 4.0L L6 | 4.7L V8 | 4.0L L6 | 4.7L V8 |
| Note | - | - | - | - | - | - | - | - | - |
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the installation side, mounting points and ball-joint configuration.
- Inspect the new control arm, bushings, ball joint and dust boot for damage.
- Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
- Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
- Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
- Step-1: Raise and support the vehicle, then remove the wheel.
- Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
- Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
- Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
- Step-5: Position the new arm and hand-start all fasteners.
- Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
- Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
- Confirm all fasteners and locking components are secure.
- Check that the wheel rotates freely without interference.
- Perform a short, low-speed road test and check for noise, pulling or unstable steering.
- A professional four-wheel alignment is required after installation.
- Recheck the installation after the first 50–100 km.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
1999-2004 Jeep Grand Cherokee 4.0L L6 | 6 PC Front Upper Lower Control Arm | OE#52088355AB/RK641869 - PHILTOP
Corrosion Resistant
Deformation Resistant
- SKU:
- 7249CAK075TUS
$165.10
Check if this fits your vehicle
Select a vehicle to check this product.
- Items Included
- 2x Front Upper Control Arm - K640797 2x Front Lower Control Arm - K640773 2x Rear Lower Control Arm - MS251028/K641869
- Quantity
- 6
- Position
- Front Upper、Lower
- Surface Finish
- Chrome
- Material
- Steel
- Warranty Period
- 2-Year
- #21,497 in Automotive (See Top 100 in Automotive)
- #27 in Automotive Replacement Control Arms
- Fitment: PHILTOP control arms fit for Grand Cherokee 1999-2004. Please check fitment for accurate information before purchasing
- Kit Includes: 2x Front Upper Control Arm - K640797, 2x Front Lower Control Arm - K640773, 2x Rear Lower Control Arm - MS251028/K641869
- OE Number: K640797 K640773 K641869
- Durable Design: PHILTOP Control Arms are made of high quality material which meets or exceeds OEM standard. They ensure long - lasting performance, reducing the need for frequent replacements. This not only saves you money on maintenance costs but also provides peace of mind, knowing your vehicle's handling and safety are supported by reliable, enduring components
- Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
0.0
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 1999 - 2004 | Jeep | Grand Cherokee | Laredo | 4.0L L6 | - |
| 1999 - 2004 | Jeep | Grand Cherokee | Laredo | 4.7L V8 | - |
| 1999 - 2004 | Jeep | Grand Cherokee | Limited | 4.0L L6 | - |
| 1999 - 2004 | Jeep | Grand Cherokee | Limited | 4.7L V8 | - |
| 2002 - 2004 | Jeep | Grand Cherokee | Overland | 4.7L V8 | - |
| 2004 | Jeep | Grand Cherokee | Special Edition | 4.0L L6 | - |
| 2004 | Jeep | Grand Cherokee | Special Edition | 4.7L V8 | - |
| 2002 | Jeep | Grand Cherokee | Sport | 4.0L L6 | - |
| 2002 | Jeep | Grand Cherokee | Sport | 4.7L V8 | - |
Product Specifications
- Brand
- PHILTOP
- Items Included
- 2x Front Upper Control Arm - K640797 2x Front Lower Control Arm - K640773 2x Rear Lower Control Arm - MS251028/K641869
- Quantity
- 6
- Position
- Front Upper、Lower
- Surface Finish
- Chrome
- Material
- Steel
- Warranty Period
- 2-Year
- OE Number
- 52088355AB,52088217,52088355AC,52088217AC,52088355AD,52088217AB,52088208AE,52088208AD,52088208AC,52088208,52088208AB
- Part Number
- RK641869,RK640773,RK640797,TC5776,TC5297,TC5805,GS20425,CA96510,CA96510PR,GS20424,CK641869,JTC2750,GS251028,CA96065PR,CK640797,CA96050PR,JTC2749
How to Install?
Installation Manual Download
Checks Before Installation
- Confirm the installation side, mounting points and ball-joint configuration.
- Inspect the new control arm, bushings, ball joint and dust boot for damage.
- Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
- Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
- Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.
Installation Steps
- Step-1: Raise and support the vehicle, then remove the wheel.
- Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
- Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
- Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
- Step-5: Position the new arm and hand-start all fasteners.
- Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
- Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.
After Installation
- Confirm all fasteners and locking components are secure.
- Check that the wheel rotates freely without interference.
- Perform a short, low-speed road test and check for noise, pulling or unstable steering.
- A professional four-wheel alignment is required after installation.
- Recheck the installation after the first 50–100 km.
Product Video
Product Description


Reviews
0.0/5
Based on 0 reviews
0%
0%
0%
0%
0%
No reviews match these filters.
FAQS
No FAQs have been added for this product yet.