2011-2016 Chevrolet Cruze 1.8L | Engine Gasket Set with timing belt | TS26338 - PHILTOP

2011-2016 Chevrolet Cruze 1.8L | Engine Gasket Set with timing belt | TS26338 - PHILTOP

Reduced Oil Leak Risk

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
55ISTCK0037US

Specifications

Brand
PHILTOP
OE Number
TS26338 ,TCK338 ,71739779 ,1334142

Highlights

  • OE Part Number - The head gasket set's replaces part number: HGS345, HS54702A, HS26516PT, 1HS26516PT-1. The timing belt kit's replaces part number: 71739779, 1334142, 13447296, 55563374, 55574864, 24422964, 24436052, 24405895, TBK338, TKTB338, TCK338, TS26338, TCKWP338, 24502K, BWPK41017, WPK41017
  • Fitment - Our full cylinder engine gasket kit is compatible with: Chevy Sonic 2012-2018 1.8L, Chevy Cruze 2011-2015 1.8L, Chevy Cruze Limited 2016 1.8L
  • Package Include - Head Gasket Set: 1x Head Bolts Kit, 1x Head Gasket Set. Timing Belt Kit: 1x Gasket, 1x Belt Idler, 1x Timing Belt, 1x Water Pump, 1x Belt Tensioner. Cam Timing Tool Kit: 1x Plastic storage box, 1x Flywheel Locking Tool, 1x Camshaft Locking Tool, 1x Crankshaft Locking Tool, 1x Engine Tensioner Spanner, 2x Camshaft Gear Locking Tool, 1x Timing Belt Tensioner Locking Tool, 1x V-ribbed Belt Tensioner Locking Tool
  • Precise Hole Positioning - Automotive replacement timing gasket sets is designed to OE standards with precise hole positioning, ensuring a perfect match with the original vehicle. You can complete the engine replacement or repair task yourself, saving time and money on a trip to the auto repair shop
  • Durable - The timing belt kit is made of high-quality materials, including non-asbestos materials, high-quality silicone rubber, fluorine rubber valve stem seals, and graphite or MLS head gaskets. It has excellent sealing and non-stick wear-resistant layers and can withstand high pressure, high temperature, and corrosive

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20152011 - 20152016201620162012 - 20182012 - 20182012 - 2014
MakeChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevrolet
ModelCruzeCruzeCruze LimitedCruze LimitedCruze LimitedSonicSonicSonic
TrimLLSLLSLTLSLTLTZ
Engine1.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L4
Note--------

How to Install?

Checks Before Installation

  • Confirm whether the repair requires an upper, lower, full or complete overhaul kit, then verify every included component.
  • Match the repair scope to the actual fault. External oil leakage alone may not require cylinder-head removal.
  • Perform a compression test or cylinder leak-down test, and check the cylinder head for warpage before disassembly.
  • Check surface flatness with a straightedge and feeler gauge. Machine surfaces that exceed the manufacturer’s limit.
  • Confirm the correct TTY cylinder-head bolts and prepare a torque wrench and angle gauge.
  • Drain all fluids and label the timing components, wiring, vacuum lines, fuel lines and removed gaskets.

Installation Steps

  • Step-1: Thoroughly clean and dry every cylinder-head bolt hole. Oil or coolant trapped inside can create hydraulic pressure and crack the engine block.
  • Step-2: Clean sealing surfaces only with a plastic scraper and approved cleaner. Do not use grinding discs or wire brushes.
  • Step-3: Install MLS head gaskets dry unless the service manual specifically requires sealant at designated oil or coolant passages.
  • Step-4: Confirm the FRONT and UP markings and ensure all locating dowels are fully seated.
  • Step-5: Install new TTY cylinder-head bolts. Tighten them in stages and in the specified center-outward sequence.
  • Step-6: Blow out all oil and coolant passages with compressed air before final assembly.

After Installation

  • Remove the spark plugs and manually rotate the engine two complete turns to confirm free movement.
  • At first startup, monitor oil pressure, coolant temperature and exhaust color.
  • After the engine reaches operating temperature and fully cools, inspect all connections for oil or coolant leaks.
  • Replace the engine oil and oil filter after the first 500–1,000 miles to remove break-in debris.
  • Recheck cylinder compression and continue monitoring coolant level and temperature.
  • Avoid high loads and extended idling during the break-in period.

Product Description

head gasket sethead gasket set

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

alejandra pereira

01/25/2026

Verified buyer

My car had been overheating intermittently and had a noticeable ticking sound from the engine. After some research, I decided to replace the head gasket and timing belt, and this kit had everything I needed. The timing belt felt sturdy, the water pump (included in my kit) was easy to install, and the head gasket set sealed up perfectly. I'm very satisfied.

RickFixIt_807

03/31/2026

Looks like good quality stuff, especially for the price. Definitely a good bang for your buck. The water pump feels solid and the belt looks durable.

FAQS

No FAQs have been added for this product yet.