2011-2016 Chevrolet Cruze 1.4L | Engine Gasket Set with timing chain | HS26540PT-1 - PHILTOP

2011-2016 Chevrolet Cruze 1.4L | Engine Gasket Set with timing chain | HS26540PT-1 - PHILTOP

Reduced Oil Leak Risk

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
96ISTCK0057US

Specifications

Brand
PHILTOP
OE Number
HS26540PT-1,HSCV001,HS54898,HS31411,HGS345

Highlights

  • [Replacement OE Number] Head Gasket Set with Bolts Replace: HS54898, HSCV001, HS26540PT-1, HGS345, HS54702A, HS31411, HS26516PT. Timing Chain Kit Replace: HS26540PT-1, HSCV001, HS54898, HS31411, 22HP47N, ETCK2102, TK343.
  • [Compatibility] The head gasket kit & timing chain kit is compatible with: Chevy Cruze 2011-2015 1.4T, Chevy Trax 2015-2020, Buick Encore 2016-2019 2021 1.4T, Buick Encore 2013-2015 2020, Chevy Sonic 2012-2018 1.4T, Chevy Cruze Limited 2016 1.4T, Chevy Trax 2021 1.4T, Chevy Sonic 2019-2020.
  • [Package include] The cylinder Full gasket set includes: 1 x Timing Chain Kit, 1 x Crank Sprocket, 1 x Hydraulic Chain Tensioner, 1 x Head Gasket, 1 x Head Set, 3 x Guide Rails, 12 x Cylinder Head Bolts.
  • [Precise Hole Positioning] Automotive replacement head gasket sets is designed to OE standards with precise hole positioning, ensuring a perfect match with the original vehicle. You can complete the engine replacement or repair task yourself, saving time and money on a trip to the auto repair shop.
  • [Durable] The engine gasket set is made of high-quality materials, including non-asbestos materials, high-quality silicone rubber, fluorine rubber valve stem seals, and graphite or MLS head gaskets. It has excellent sealing and non-stick wear-resistant layers and can withstand high pressure, high temperature, and corrosive.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20212013 - 20162017 - 20202013 - 20162017 - 20212017 - 20182013 - 20182017 - 20202011 - 20152011 - 20152011 - 20152016201620162019 - 20202012 - 20202012 - 20162017 - 20202013 - 20162015 - 20212015 - 20212015 - 20162017 - 2020
MakeBuickBuickBuickBuickBuickBuickBuickBuickChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevroletChevrolet
ModelEncoreEncoreEncoreEncoreEncoreEncoreEncoreEncoreCruzeCruzeCruzeCruze LimitedCruze LimitedCruze LimitedSonicSonicSonicSonicSonicTraxTraxTraxTrax
TrimBaseConvenienceEssenceLeatherPreferredPreferred IIPremiumSport TouringEcoLTLTZEcoLTLTZLSLTLTZPremierRSLSLTLTZPremier
Engine1.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L41.4L L4
Note-----------------------

How to Install?

Checks Before Installation

  • Confirm whether the repair requires an upper, lower, full or complete overhaul kit, then verify every included component.
  • Match the repair scope to the actual fault. External oil leakage alone may not require cylinder-head removal.
  • Perform a compression test or cylinder leak-down test, and check the cylinder head for warpage before disassembly.
  • Check surface flatness with a straightedge and feeler gauge. Machine surfaces that exceed the manufacturer’s limit.
  • Confirm the correct TTY cylinder-head bolts and prepare a torque wrench and angle gauge.
  • Drain all fluids and label the timing components, wiring, vacuum lines, fuel lines and removed gaskets.

Installation Steps

  • Step-1: Thoroughly clean and dry every cylinder-head bolt hole. Oil or coolant trapped inside can create hydraulic pressure and crack the engine block.
  • Step-2: Clean sealing surfaces only with a plastic scraper and approved cleaner. Do not use grinding discs or wire brushes.
  • Step-3: Install MLS head gaskets dry unless the service manual specifically requires sealant at designated oil or coolant passages.
  • Step-4: Confirm the FRONT and UP markings and ensure all locating dowels are fully seated.
  • Step-5: Install new TTY cylinder-head bolts. Tighten them in stages and in the specified center-outward sequence.
  • Step-6: Blow out all oil and coolant passages with compressed air before final assembly.

After Installation

  • Remove the spark plugs and manually rotate the engine two complete turns to confirm free movement.
  • At first startup, monitor oil pressure, coolant temperature and exhaust color.
  • After the engine reaches operating temperature and fully cools, inspect all connections for oil or coolant leaks.
  • Replace the engine oil and oil filter after the first 500–1,000 miles to remove break-in debris.
  • Recheck cylinder compression and continue monitoring coolant level and temperature.
  • Avoid high loads and extended idling during the break-in period.

Product Description

head gasket sethead gasket set

Reviews

5.0/5

Based on 1 review

5100%
40%
30%
20%
10%

Mike from Texas_339

06/21/2026

The parts in this kit look really high quality. For the price, it's an amazing deal. Definitely got my money's worth and then some.

FAQS

No FAQs have been added for this product yet.