COMPLETE IGNITION TUNE UP KIT – Includes 4 ignition coil packs UF670 and 4 premium iridium spark plugs 94372.This coil packs and spark plugs set restores ignition performance, improves engine response, reduces misfires, and helps maintain smooth acceleration and fuel efficiency.
EXACT OEM REPLACEMENT – Designed to match OE specifications for fit, form, and function. Replaces worn ignition coils and spark plugs for dependable starting, stable idling, and consistent engine performance. Reference Coil Number:LTR6GP8, 94372, UF670, CM5Z12029A, 5C1873, 6736203, C1816, CM5Z12029K, GN10621, LR030637, JDE30294, LR084889, C899, 48770, COP588, CM5E12A366BC, CM5E12A366CA, E1170, JDE39937, SKIC157, U5241, 5174, E1178, CM5E12A366CB, IC781, IC773SB.
IMPROVED IGNITION PERFORMANCE – Delivers strong and stable spark energy to help eliminate rough idle, hesitation, engine misfires, hard starts, and loss of power caused by failing ignition components.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
5.0/5
Based on 5 reviews
5
100%
4
0%
3
0%
2
0%
1
0%
Customer photos and videos
F
FrankFrank
04/25/2026
Verified buyer
Perfect fit and a simple service to refresh the performance of my 12 year old car. The kit arrived complete and well protected, installation was pretty simple. The new plugs and coil packs do seem to improve engine performance a bit and increase gas mileage a bit.
A
Andrew
04/26/2026
Verified buyer
I installed this ignition coil pack and iridium spark plugs on my 2012 Ford focus and noticed an immediate improvement in cold starts and smoother idle. Acceleration felt crisper with fewer misfires, and fuel economy seemed slightly better during my week of testing. Installing it went swimmingly using basic tools, and the parts have shown reliable performance at what I find to be a reasonable price.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
COMPLETE IGNITION TUNE UP KIT – Includes 4 ignition coil packs UF670 and 4 premium iridium spark plugs 94372.This coil packs and spark plugs set restores ignition performance, improves engine response, reduces misfires, and helps maintain smooth acceleration and fuel efficiency.
EXACT OEM REPLACEMENT – Designed to match OE specifications for fit, form, and function. Replaces worn ignition coils and spark plugs for dependable starting, stable idling, and consistent engine performance. Reference Coil Number:LTR6GP8, 94372, UF670, CM5Z12029A, 5C1873, 6736203, C1816, CM5Z12029K, GN10621, LR030637, JDE30294, LR084889, C899, 48770, COP588, CM5E12A366BC, CM5E12A366CA, E1170, JDE39937, SKIC157, U5241, 5174, E1178, CM5E12A366CB, IC781, IC773SB.
IMPROVED IGNITION PERFORMANCE – Delivers strong and stable spark energy to help eliminate rough idle, hesitation, engine misfires, hard starts, and loss of power caused by failing ignition components.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
5.0/5
Based on 5 reviews
5
100%
4
0%
3
0%
2
0%
1
0%
Customer photos and videos
F
FrankFrank
Apr 25,2026
Verified buyer
Perfect fit and a simple service to refresh the performance of my 12 year old car. The kit arrived complete and well protected, installation was pretty simple. The new plugs and coil packs do seem to improve engine performance a bit and increase gas mileage a bit.
A
Andrew
Apr 26,2026
Verified buyer
I installed this ignition coil pack and iridium spark plugs on my 2012 Ford focus and noticed an immediate improvement in cold starts and smoother idle. Acceleration felt crisper with fewer misfires, and fuel economy seemed slightly better during my week of testing. Installing it went swimmingly using basic tools, and the parts have shown reliable performance at what I find to be a reasonable price.