COMPLETE IGNITION TUNE UP KIT – Includes 4 ignition coil packs UF656 and 4 premium iridium spark plugs 93501.This coil packs and spark plugs set restores ignition performance, improves engine response, reduces misfires, and helps maintain smooth acceleration and fuel efficiency.
EXACT OEM REPLACEMENT – Designed to match OE specifications for fit, form, and function. Replaces worn ignition coils and spark plugs for dependable starting, stable idling, and consistent engine performance. Reference Coil Number:LKAR7BIX11S, 93501, UF656, PE2018100, 5C1894, PE0118100A, 5192, PE0118100, PE2018100A, C857, GN10625, C1837, E1156, 48895, UF656T, U5279, COP574, P51B18100, 5C2281, 6733205, MPSMF656, CF94, 1813993, IC759SB, E1156P, 3312467757248976, 3312467757248975, 2IGC0462.
IMPROVED IGNITION PERFORMANCE – Delivers strong and stable spark energy to help eliminate rough idle, hesitation, engine misfires, hard starts, and loss of power caused by failing ignition components.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.9/5
Based on 8 reviews
5
88%
4
13%
3
0%
2
0%
1
0%
Customer photos and videos
J
JJ
07/26/2026
Verified buyer
Installed on 2014 CX5 with 2.5L engine.Coils fit just like the original. The plugs appear to be NGK. Some tips:- the plastic cover on the top of the engine pops off - just lift.- Use a flat blade screwdriver to push down on the tab on the ignition coil then pull off the wire connector.- Spark plugs require a 14mm deep well socket. cut off a small length of tubing and shove it down into the socket, so that the spark plug will stay in the socket and not fall out when fitting the new plug into the engine. Test fit the plug into the socket to make sure it is retained.Car drives great after this repair. I will update this posting after some months/miles.
A
Andrew
08/26/2026
Verified buyer
I received the PHILTOP ignition coil pack and iridium spark plugs for my Mazda and found the installation process straightforward. The parts fit properly, and my vehicle starts more smoothly and runs with better overall performance. They appear to be well-made and provide a convenient replacement option for worn ignition components.
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
COMPLETE IGNITION TUNE UP KIT – Includes 4 ignition coil packs UF656 and 4 premium iridium spark plugs 93501.This coil packs and spark plugs set restores ignition performance, improves engine response, reduces misfires, and helps maintain smooth acceleration and fuel efficiency.
EXACT OEM REPLACEMENT – Designed to match OE specifications for fit, form, and function. Replaces worn ignition coils and spark plugs for dependable starting, stable idling, and consistent engine performance. Reference Coil Number:LKAR7BIX11S, 93501, UF656, PE2018100, 5C1894, PE0118100A, 5192, PE0118100, PE2018100A, C857, GN10625, C1837, E1156, 48895, UF656T, U5279, COP574, P51B18100, 5C2281, 6733205, MPSMF656, CF94, 1813993, IC759SB, E1156P, 3312467757248976, 3312467757248975, 2IGC0462.
IMPROVED IGNITION PERFORMANCE – Delivers strong and stable spark energy to help eliminate rough idle, hesitation, engine misfires, hard starts, and loss of power caused by failing ignition components.
P0351–P0356-Specific ignition-coil circuit fault — inspect the corresponding coil circuit and wiring.
Checks Before Installation
Confirm the ignition coils and spark plugs match the vehicle and original parts.
Check that the battery voltage meets the vehicle specification; the manual recommends at least 12.4V with the engine off.
Inspect the coil housings, connectors and wiring for cracks, corrosion or damage.
Check the spark-plug wells for oil, carbon deposits or debris.
Allow the engine to cool completely before removing the spark plugs.
Confirm the specified spark-plug gap and installation torque in the vehicle service manual.
Installation Steps
Step-1: Disconnect the Battery: Switch off the ignition and disconnect the negative battery cable to prevent short circuits or accidental starting.
Step-2: Remove the Old Parts: Label the connectors when necessary, unplug and remove the ignition coils, then clean around each spark-plug well before removing the plugs.
Step-3: Check the New Spark Plugs: Confirm the correct model and measure the electrode gap with a feeler gauge. Do not install dropped or damaged spark plugs.
Step-4: Install and Torque the Spark Plugs: Thread each spark plug fully by hand to prevent cross-threading. Then tighten it with a torque wrench to the vehicle manufacturer’s specified torque. Do not overtighten.
Gasket Seat Spark Plug: Uses a crush gasket to seal against the cylinder head.
Tapered Seat Spark Plug – No Gasket: Uses the tapered metal seat to seal directly against the cylinder head.
Step-5: Complete the Installation: Install the ignition coils, tighten the mounting bolts to specification, fully seat every connector and reconnect the negative battery cable.
Spark Plug Torque Reference
Spark Plug Thread
Recommended Torque
18 mm (M18)
35–40 N·m (25.8–29.5 lb-ft)
14 mm (M14)
25–30 N·m (18.4–22.1 lb-ft)
12 mm (M12)
15–20 N·m (11.1–14.8 lb-ft)
10 mm (M10)
10–12 N·m (7.4–8.9 lb-ft)
8 mm (M8)
8–10 N·m (5.9–7.4 lb-ft)
Tapered Seat – No Gasket
10–20 N·m (7.4–14.8 lb-ft)
Important: This table is for general reference only. Required torque varies by spark-plug design, seat type and cylinder-head material. Always follow the vehicle service manual or spark-plug manufacturer’s specification when available.
After Installation
Clear historical fault codes with an OBD-II scanner.
Start the engine and let it idle for several minutes.
Confirm smooth idle, normal acceleration and no misfire or unusual vibration.
Check that the malfunction indicator light remains off.
Perform a short road test, then rescan for returned fault codes.
Product Video
Product Description
Reviews
4.9/5
Based on 8 reviews
5
88%
4
13%
3
0%
2
0%
1
0%
Customer photos and videos
J
JJ
Jul 26,2026
Verified buyer
Installed on 2014 CX5 with 2.5L engine.Coils fit just like the original. The plugs appear to be NGK. Some tips:- the plastic cover on the top of the engine pops off - just lift.- Use a flat blade screwdriver to push down on the tab on the ignition coil then pull off the wire connector.- Spark plugs require a 14mm deep well socket. cut off a small length of tubing and shove it down into the socket, so that the spark plug will stay in the socket and not fall out when fitting the new plug into the engine. Test fit the plug into the socket to make sure it is retained.Car drives great after this repair. I will update this posting after some months/miles.
A
Andrew
Aug 26,2026
Verified buyer
I received the PHILTOP ignition coil pack and iridium spark plugs for my Mazda and found the installation process straightforward. The parts fit properly, and my vehicle starts more smoothly and runs with better overall performance. They appear to be well-made and provide a convenient replacement option for worn ignition components.