2003 Ford E-450 Super Duty 7.3L V8 | 4.0KW 13-Tooth Starter | 17802N - PHILTOP

2003 Ford E-450 Super Duty 7.3L V8 | 4.0KW 13-Tooth Starter | 17802N - PHILTOP

Power: 4.0 kW

Pinion Teeth: 13

Quick Starting Response

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6817STM088GUS

Specifications

Brand
PHILTOP
Power
4.0 kW
Pinion Teeth
13
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 17802N 1x Manual
Warranty Period
2-Year
Part Number
17802N

Highlights

  • Reference Starter Part Number: 3232,32328,3240,3240N,6L5T11000CA,6L5Z11002CA,AR3T11000AA,F07U11000AA,F0TZ11002A,F87U11000B1A,F87U11000B1B,F87U11000BA,F87U11000BB,F87Z11002BA,FO7U11000AA,FO7UAA,FOTZ11002A,ZZL018400,ZZP518400,ZZP518400A
  • Automotive Starter Specifications: Amp-1.4,Voltage -12 Volt,Tooth Pinion/Teeth-10,Rotation-CW,Design-PMGR
  • Compatibility:1990-2011 Ran-g-er 4.0L, 1991-2002 Explorer 4.0L, 2005-2009 Mu-st-g 4.0L, 2002-2003 Explorer Sport Trac 4.0L, 1994-2007 B4000 4.0L, 1991-1994 Navajo 4.0L, 2008-2009 B4000
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H salt spray resistance, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: New Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003200320031995 - 19981995 - 19981995 - 20021995 - 19961995 - 20002001 - 20021995 - 19981995 - 20021995 - 19981999 - 20031999 - 20002000 - 200220032002200319991996 - 199920032000 - 20032000 - 20031995 - 19961995 - 19961994 - 19961994 - 19961999 - 20031999 - 20031999 - 2003199719951995 - 19961994 - 19971994 - 199720031999 - 20031999 - 20031999 - 20031999 - 20031999 - 20031999 - 20031999 - 20031999 - 20031999 - 200319971995 - 19971995 - 1997
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelE-350 Club WagonE-350 Club WagonE-350 Club WagonE-350 EconolineE-350 EconolineE-350 Econoline Club WagonE-350 Econoline Club WagonE-350 Econoline Club WagonE-350 Econoline Club WagonE-350 Econoline Club WagonE-350 Econoline Club WagonE-350 Econoline Club WagonE-350 Super DutyE-350 Super DutyE-450 Econoline Super DutyE-450 Super DutyE-550 Econoline Super DutyE-550 Super DutyEconoline Super DutyEconoline Super DutyExcursionExcursionExcursionF-250F-250F-250F-250F-250 Super DutyF-250 Super DutyF-250 Super DutyF-350F-350F-350F-350F-350F-350 Super DutyF-350 Super DutyF-350 Super DutyF-350 Super DutyF-450 Super DutyF-450 Super DutyF-450 Super DutyF-550 Super DutyF-550 Super DutyF-550 Super DutyF-Super DutyF-Super DutyF-Super Duty
TrimChateauXLXLTBaseXLChateauChateau HDCustomXLXL HDXLTXLT HDBaseXLCustomCustomCustomCustomBaseCustomEddie BauerLimitedXLTEddie BauerSpecialXLXLTLariatXLXLTBaseEddie BauerSpecialXLXLTKing RanchLariatXLXLTLariatXLXLTLariatXLXLTBaseXLXLT
Engine7.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V87.3L V8
Note------------------------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Kelly_SUV_Life_79

11/21/2025

Shipping was lightning fast, which I really appreciated. The install was a piece of cake and everything lined up perfectly with the factory holes. Started right up on the first crank.

Mike from Texas_976

03/18/2026

My old Explorer was barely starting, but this motor breathed new life into it. It kicks over way faster now and sounds much healthier than the old worn-out unit. Great upgrade for an older truck.

FAQS

Please refer to the picture. Generally,a starter does not include bolts or other accessories. It is recommended to make full use of the existing bolts, screws and other accessories, which can be perfectly matched with the original accessories.

Yes. Follow your vehicle’s instructions; on most conventional vehicles, disconnect the negative terminal first.

Yes, if they are undamaged and connect securely. Replace badly corroded, frayed, or melted cables.