2013-2017 Hyundai Accent 1.6L | 0.9KW 10-Tooth Starter | 30256N - PHILTOP

2013-2017 Hyundai Accent 1.6L | 0.9KW 10-Tooth Starter | 30256N - PHILTOP

Power: 0.9 kW

Pinion Teeth: 10

Quick Starting Response

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8952STM094BUS

Specifications

Brand
PHILTOP
Power
0.9 kW
Pinion Teeth
10
Voltage
12 V
Rotation Direction
CW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 30256N 1x Manual
Warranty Period
2-Year
Part Number
30256N

Highlights

  • Fitment: Starter Compatible with Buick 2005-2009 Allure 3.8L, 2005-2009 LaCrosse 3.8L, 2002-2005 LeSabre, 2006-2008 Lucerne 3.8L, 2002-2005 Park Avenue, 2001-2004 Regal, Pontiac 2002-2005 Bonneville 3.8L, 2002 Firebird 3.8L, 2001-2008 Grand Prix 3.8L, Chevy 2002 Camaro 3.8L, 2001-2005 Impala 3.8L(PG260G Starter), 2001-2005 Monte Carlo 3.8L(PG260G Starter), (Delco Unit).(Please MATCH your vehicle on the left top before purchasing)
  • Specifications: ①Power: 1.4Kw, ②Voltage:12, ③Rotation Direction: CW, ④Specs for: Delco PG260G PMGR, ⑤Tooth Pinion: 11.[Reference Number]:89017715, 89017452, 9000930, 12574983, 12593763, 6484N, 12574903, 8100009
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H corrosion resistance test, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: New Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance
  • Easy Installation: Our replacement alternators for cars are designed for plug-and-play installation, requiring no modifications or drilling, making the installation quick and easy. Note: 1.Please double check the part number of your item, matching information is for reference only.2.Product functions are fully compatible with the original equipment. Minor cosmetic differences may occur across production batches; please refer to the actual product for details

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20152013 - 20152013 - 20142016 - 20172015 - 201720172013 - 20172013 - 20152013 - 20152013 - 20152012 - 2014
MakeHyundaiHyundaiHyundaiHyundaiHyundaiHyundaiHyundaiKiaKiaKiaKia
ModelAccentAccentAccentAccentAccentAccentVelosterRioRioRioSoul
TrimGLSGSSESESportValue EditionBaseEXLXSXBase
Engine1.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L41.6L L4
Note
From 07/10/2012
From 07/10/2012
From 07/10/2012
From 07/10/2012
From 07/10/2012
From 07/10/2012
From 7/10/2012
Exc. Start/Stop Feature
Exc. Start/Stop Feature
Exc. Start/Stop Feature
Exc. Start/Stop Feature;From 06/01/2012

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

5.0/5

Based on 3 reviews

5100%
40%
30%
20%
10%

genevieve

12/01/2024

Verified buyer

My Holland Industrial G4050 had been struggling to start due to a faulty starter. After installing the PHILTOP 5801N, it came back to life instantly. Starts quickly and runs smoothly – absolutely fantastic!

Landon Byrnes

06/08/2025

Verified buyer

I’m so stoked I got this PHILTOP Starter Motor for my 2004 RSX Type-S! It fit like a glove and now my car starts up super fast. No more struggling to get it going!

FAQS

Consider replacement if you notice: slow cranking, loud grinding/clicking noises, or the engine not turning over. Please confirm the specific parameters of the product before purchasing.

Recheck battery power and wiring. If the engine cranks normally but won’t start, another system may need diagnosis.

Avoid prolonged or repeated cranking. Follow your vehicle’s recommended starting intervals to prevent overheating.

2013-2017 Hyundai Accent 0.9KW Starter 30256N | PHILTOP