2011-2013 Honda Odyssey 3.5L V6 | 1.8KW 19-Tooth Starter | 19084N - PHILTOP

2011-2013 Honda Odyssey 3.5L V6 | 1.8KW 19-Tooth Starter | 19084N - PHILTOP

Power: 1.8 kW

Pinion Teeth: 19

Quick Starting Response

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5091STM083CUS

Specifications

Brand
PHILTOP
Power
1.8 kW
Pinion Teeth
19
Voltage
12 V
Rotation Direction
CCW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 19084N 1x Manual
Warranty Period
2-Year
Part Number
19084N

Highlights

  • Fitment: Starter Compatible with Buick 2005-2009 Allure 3.8L, 2005-2009 LaCrosse 3.8L, 2002-2005 LeSabre, 2006-2008 Lucerne 3.8L, 2002-2005 Park Avenue, 2001-2004 Regal, Pontiac 2002-2005 Bonneville 3.8L, 2002 Firebird 3.8L, 2001-2008 Grand Prix 3.8L, Chevy 2002 Camaro 3.8L, 2001-2005 Impala 3.8L(PG260G Starter), 2001-2005 Monte Carlo 3.8L(PG260G Starter), (Delco Unit).(Please MATCH your vehicle on the left top before purchasing)
  • Specifications: ①Power: 1.4Kw, ②Voltage:12, ③Rotation Direction: CW, ④Specs for: Delco PG260G PMGR, ⑤Tooth Pinion: 11.[Reference Number]:89017715, 89017452, 9000930, 12574983, 12593763, 6484N, 12574903, 8100009
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance, 96H corrosion resistance test, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your safety and stable power in any condition
  • Efficient Quiet: New Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance
  • Easy Installation: Our replacement alternators for cars are designed for plug-and-play installation, requiring no modifications or drilling, making the installation quick and easy. Note: 1.Please double check the part number of your item, matching information is for reference only.2.Product functions are fully compatible with the original equipment. Minor cosmetic differences may occur across production batches; please refer to the actual product for details

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20112011 - 20132011 - 20132011 - 20132009 - 20142009 - 20142009 - 20142009 - 2014
MakeAcuraHondaHondaHondaHondaHondaHondaHonda
ModelTLOdysseyOdysseyOdysseyPilotPilotPilotPilot
TrimSH-AWDEXEX-LLXEXEX-LLXTouring
Engine3.7L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V63.5L V6
Note--------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter motorstarter motor

Reviews

5.0/5

Based on 1 review

5100%
40%
30%
20%
10%

Anthony Ray

09/30/2026

Verified buyer

This is a Great Starter and easy to install

FAQS

Check the part number, mounting points, and electrical connections. Confirm any differences before installation.

Not necessarily. Keep your existing battery if it tests good and holds a charge.

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.