1998-2005 Volkswagen Beetle 2.0L/1.8L | 1.1KW 9-Tooth Starter | OE#020911023SX/438138 - PHILTOP

1998-2005 Volkswagen Beetle 2.0L/1.8L | 1.1KW 9-Tooth Starter | OE#020911023SX/438138 - PHILTOP

Power: 1.1 kW

Pinion Teeth: 9

Quick Starting Response

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3612STM0191US

Specifications

Brand
PHILTOP
Power
1.1 kW
Pinion Teeth
9
Voltage
12 V
Rotation Direction
CCW
Material
Pure Copper Windings, Aluminum Housing, Laminated Steel Core
Items Included
1x Starter 17781N 1x Manual
Warranty Period
2-Year
OE Number
020911023SX
Part Number
438138,17781N,SR0425N,SR0425X,17636,2806112,S6196,3361718,99711,1870741,3231573

Highlights

  • Replacement Part Numbers: 3221, 3267, 281-8003
  • Fitment: Starter compatible with 2004-2007 TITAN, 2005-2006 Armada, 2004-2006 QX56, 2004 Pathfinder Armada
  • High Quality: Starter is made from high-quality materials and construction, ensuring durability and a long lifespan even under harsh conditions. This starter motor features a straightforward and Direct Replacement design, which can reduce downtime and labor costs.
  • Premium Starters: Rigorously tested to OE standards with 2000H endurance,96H corrosion resistance test, extreme temperatures from -40°C to 105°C, and harsh vibration impacts. Built for unparalleled reliability, ensuring your Safety and stable power in any condition
  • Efficient Quiet: New Starter with high-quality coils and precision gears enable quick, smooth starts with no noise. Superior conductive materials reduce fuel consumption and prevent short circuits. Install once for lasting performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year19981999 - 20031999 - 20051999 - 20051999 - 20051999 - 20042001 - 20022001 - 20021999 - 200620001999 - 200620062000200019992003 - 20041999 - 20052000 - 20041999 - 2005200120031999
MakeVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagen
ModelBeetleBeetleBeetleBeetleBeetleBeetleBeetleBeetleGolfGolfGolfGolfGolfGolfGolfJettaJettaJettaJettaJettaJettaJetta
TrimBaseGLGLGLSGLSGLXSportSportGLGLSGLSGTI 1.8TGTI GLSGTI GLSWolfsburg EditionGLGLGLSGLSWolfsburg EditionWolfsburg EditionWolfsburg Edition
Engine2.0L L41.8L L42.0L L41.8L L42.0L L41.8L L41.8L L42.0L L42.0L L41.8L L42.0L L41.8L L41.8L L42.0L L42.0L L41.8L L42.0L L41.8L L42.0L L41.8L L41.8L L42.0L L4
Note--------
Engine Code AVH
Engine Code AVH
Engine Code AVH
Engine Code AVH
Engine Code AVH
Engine Code AVH
Engine Code AVH
-------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, cables, and grounds.
  • P0615-Starter relay circuit fault:check the relay and control wiring.
  • P0616-Starter relay circuit low:check for wiring damage or a short to ground.
  • P0617-Starter relay circuit high:check for an open circuit or a short to power.
  • P0335-Crankshaft position sensor “A” circuit fault:may cause a crank-but-no-start condition.

Codes alone do not confirm starter failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points, electrical connections, and gear size/tooth count to the original starter.
  • Check the battery: Make sure it is fully charged and the terminals are clean and secure.
  • Check related components: Inspect the starter fuse, relay, wiring, and flywheel ring gear before replacement.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the wiring connections, then disconnect the starter cables and connectors.
  • STEP 3 — Support the starter, remove the mounting bolts, and carefully remove the old unit.
  • STEP 4 — Install the new starter and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the cables and connectors, refit protective covers, and reconnect the negative battery cable last.

After Installation

  • Confirm all bolts and electrical connections are secure and wiring is clear of moving parts.
  • With the transmission in Park or Neutral and the parking brake applied, perform a brief starting test.
  • Check for smooth cranking and proper gear disengagement. Stop if you hear grinding or unusual noise.
  • Switch off the engine and inspect for loose connections or signs of overheating.

Product Video

Product Description

starter Replacement forstarter

Reviews

4.4/5

Based on 5 reviews

540%
460%
30%
20%
10%

Samuel

09/30/2026

Verified buyer

Perfect fit for Chevy Silverado 2012

Micah

09/20/2026

Verified buyer

I can tell these guys really care about their product. It was packaged very carefully and arrived with a test report in the box! Works way better than the beat up rebuild AutoZone sold me for $200. All brand new parts and plenty evidence of quality control. I will certainly look for Philtop the next time I need an auto part 👍

FAQS

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Yes. Follow your vehicle’s instructions; on most conventional vehicles, disconnect the negative terminal first.

Yes, if they are undamaged and connect securely. Replace badly corroded, frayed, or melted cables.