Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

2006-2009 Honda TRX450R / 2005 Bombardier Traxter 500 Auto 4x4 CVT | 4x110mm 74.1mm Center Bore M10x1.25 Thread Wheel Hub Access
Durable
6061T6
Check if this fits your vehicle
Select a vehicle to check this product.
- SKU:
- 94ISWSA5127US
Specifications
Highlights
Compatible Vehicles
Check if this fits your vehicle
Vehicle(s) Fit Information
| Year | 2001 - 2005 | 2001 - 2005 | 2005 | 2001 - 2005 | 2006 - 2009 |
|---|---|---|---|---|---|
| Make | Bombardier | Bombardier | Bombardier | Bombardier | Honda |
| Model | Traxter 500 4x4 Auto | Traxter 500 4x4 Auto XT | Traxter 500 Auto 4x4 CVT | Traxter 500 XL | TRX450R |
| Trim | Base | Base | Base | Base | Base |
| Engine | - | - | - | - | - |
| Note | - | - | - | - | - |
How to Install?
Installation Manual Download
Checks Before Installation
- Measure and confirm the bolt pattern, center bore, thread size and spacer thickness before purchasing.
- Check the stock stud length. Extended studs may be required if the original studs are too short.
- Confirm adequate wheel-to-fender clearance.
- Test-fit the spacer. It must sit completely flush against the hub or brake rotor with no gap.
Installation Steps
- Step-1: Clean the Mounting Surfaces:Remove all rust, dirt, oil and grease from the hub, studs and mounting surfaces.
- Step-2: Install the Inner Plate:Position the inner plate flush against the hub. Install the open-end lug nuts with the tapered ends facing the spacer.
- Step-3: Check Stud Clearance:Make sure the nuts sit flush inside the inner plate. If the stock studs interfere with the adapter or wheel, shorten or replace them as required.
- Step-4: Install the Outer Plate:Apply thread locker to the first 5–6 threads of the connecting bolts. Install the outer plate and torque the bolts to 50–55 ft-lb (68–75 N·m).
- Step-5: Install the Wheel:Start all lug nuts by hand and tighten them evenly in a crisscross pattern with a torque wrench. Do not use an impact wrench.
After Installation
- Confirm that the spacer, adapter and wheel sit completely flush with no gaps or interference.
- Check that all fasteners are secure and the wheel rotates freely.
- Recheck the adapter nuts and bolts after the first 50–100 miles.
- Recheck and retorque every 3,000–5,000 miles.
Product Video

Product Description


Reviews
0.0/5
Based on 0 reviews
No reviews match these filters.
FAQS
Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.
Choosing PHILTOP means choosing quality and peace of mind. Low-quality spacers can compromise safety, but PHILTOP products are engineered for durability and performance. Don’t compromise—trust PHILTOP for safe and high-performing wheel upgrades.
Add your vehicle to ensure fitment
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2006-2009 Honda TRX450R / 2005 Bombardier Traxter 500 Auto 4x4 CVT | 4x110mm 74.1mm Center Bore M10x1.25 Thread Wheel Hub Access
Durable
6061T6
- SKU:
- 94ISWSA5127US
Check if this fits your vehicle
Select a vehicle to check this product.
- Bolt Pattern
- 4x110mm
- Wheel Bolt Pattern
- 4x110mm
- Vehicle Bolt Pattern
- 4x110mm
- Thread Size
- M10x1.25
- Center Bore
- 74.1
- Hub-Centric Lip
- No
- Thickness
- 1inch
- Outside Diameter
- 147.5
- [Vehicle Application] --- The 4x110 Wheel Spacer set replacement for 2006-2009 TRX450R; 2001-2005 Traxter 500 4x4 Auto XT; Traxter 500 XL; Traxter 500 4x4 Auto; 2005 Traxter 500 Auto 4x4 CVT
- [Wheel Spacers Specification] --- Bolt Pattern: 4x110mm ; | Thickness: 1 inch(25mm) ; | Thread Pitch: M10x1.25 ; | Hub Bore: 74.1mm ; | Recommended torque: 45-55 ft/lbs. !!! Note: If the length of the vehicle bolts exceed the thickness of the wheel adapters, you need to cut the vehicle bolts
- [Enhance Driving Experience] --- These 4x110 Wheel Spacers can move your wheels further out from the wheel hub, allow for larger tire installation to the vehicle. Installing the wheel spacers can fix brake caliper clearance issues, correct tire friction issues, increase cornering stability, give your vehicle a more aggressive stance
- [Unsurpassed Quality] ---4x110 Wheel Spacer is truly forged from lightweight anodized 6061-T6 aircraft-grade aluminum alloy, the surface anodized coating can protect the metal surface from environmental erosion under extreme conditions. CNC precisely machined, with pre-installed heat treated 10.9 grade carbon steel studs, 7-10 times the corrosion resistance of similar products. The installation fit more better, so as to prevent wheel vibration and maintain the stock driving
- [Please Confirm] --- Before placing an order, confirm compatibility by entering the year, make, and model in the PhiltopAuto suitability filter in the upper left corner. --- IMPORTANT SAFETY ADVISORY --- : Torque lug bolts/nuts to manufacturer specifications. Check and re-torque all hardware after 25-50 miles. See Product Description for additional install information
0 reviews
Compatible Vehicles
Check if this fits your vehicle
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2001 - 2005 | Bombardier | Traxter 500 4x4 Auto | Base | - | - |
| 2001 - 2005 | Bombardier | Traxter 500 4x4 Auto XT | Base | - | - |
| 2005 | Bombardier | Traxter 500 Auto 4x4 CVT | Base | - | - |
| 2001 - 2005 | Bombardier | Traxter 500 XL | Base | - | - |
| 2006 - 2009 | Honda | TRX450R | Base | - | - |
Product Specifications
- Brand
- PHILTOP
- Bolt Pattern
- 4x110mm
- Wheel Bolt Pattern
- 4x110mm
- Vehicle Bolt Pattern
- 4x110mm
- Thread Size
- M10x1.25
- Center Bore
- 74.1
- Hub-Centric Lip
- No
- Thickness
- 1inch
- Outside Diameter
- 147.5
- Inside Diameter
- 2.92 in/74.1 mm
- Lug Patterns
- 4
- Type
- Wheel Spacer
- Items Included
- 4x Lug-Centric Wheel Spacers
- ATV/UTV Compatible
- ATV / Utv
- Material
- 6061T6
- Manufacturing Process
- Forge
- Recommended Torque
- 40-50 lb-ft
- Bolt Grade
- 10.9
- Warranty Period
- 2-Year
How to Install?
Installation Manual Download
Checks Before Installation
- Measure and confirm the bolt pattern, center bore, thread size and spacer thickness before purchasing.
- Check the stock stud length. Extended studs may be required if the original studs are too short.
- Confirm adequate wheel-to-fender clearance.
- Test-fit the spacer. It must sit completely flush against the hub or brake rotor with no gap.
Installation Steps
- Step-1: Clean the Mounting Surfaces:Remove all rust, dirt, oil and grease from the hub, studs and mounting surfaces.
- Step-2: Install the Inner Plate:Position the inner plate flush against the hub. Install the open-end lug nuts with the tapered ends facing the spacer.
- Step-3: Check Stud Clearance:Make sure the nuts sit flush inside the inner plate. If the stock studs interfere with the adapter or wheel, shorten or replace them as required.
- Step-4: Install the Outer Plate:Apply thread locker to the first 5–6 threads of the connecting bolts. Install the outer plate and torque the bolts to 50–55 ft-lb (68–75 N·m).
- Step-5: Install the Wheel:Start all lug nuts by hand and tighten them evenly in a crisscross pattern with a torque wrench. Do not use an impact wrench.
After Installation
- Confirm that the spacer, adapter and wheel sit completely flush with no gaps or interference.
- Check that all fasteners are secure and the wheel rotates freely.
- Recheck the adapter nuts and bolts after the first 50–100 miles.
- Recheck and retorque every 3,000–5,000 miles.
Product Video

Product Description


Reviews
0.0/5
Based on 0 reviews
No reviews match these filters.
FAQS
Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.
Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.
Choosing PHILTOP means choosing quality and peace of mind. Low-quality spacers can compromise safety, but PHILTOP products are engineered for durability and performance. Don’t compromise—trust PHILTOP for safe and high-performing wheel upgrades.