PHILTOP 10pcs Front End Suspension Kit for Chevrolet Traverse 2009-2017, GMC Acadia 2007-2016, Buick Enclave 2008-2017, Saturn O

PHILTOP 10pcs Front End Suspension Kit for Chevrolet Traverse 2009-2017, GMC Acadia 2007-2016, Buick Enclave 2008-2017, Saturn O

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2420CAK500EUS

Specifications

Brand
PHILTOP
Items Included
2x Front Inner Tie Rod End Link - EV800572 2x Front Outer Tie Rod End Link - ES800286 2x Front Stabilizer / Sway Bar Link - K750155 1x Front Lower Control Arm + Ball Joint (Driver) - K621232 1x Front Lower Control Arm + Ball Joint (Passenger) - K621231 2x Rack and Pinion Tie Rod Boot & Bellows W/Locking C-Clamps
Quantity
10
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
18569897,20774419,25798012,25995438,25798011,15869897,20905104,20817752,25981951,15869898,15127978
Part Number
ES800286,K750155,EV800572,RK621232,RK621231,TC5224,TC5233,TC5133,TA5215,TA5323,CK621232,CK621231,GS501017,GS501016,GS50606,CB90423PR,CB90424PR,GS50832,535282,534848,TI90030XL,JAR237,GS50706

Highlights

  • #41,546 in Automotive (See Top 100 in Automotive)
  • #77 in Automotive Replacement Control Arms
  • Fitment: Compatible with Buick Enclave 2008-2017, Fit for Chevrolet Traverse 2009-2017, Fit for GMC Acadia 2007-2016, Acadia Limited 2017-2017, Fit for Saturn Outlook 2007-2010
  • Kit Includes: 2x Front Inner Tie Rod End Link - EV800572;2x Front Outer Tie Rod End Link - ES800286;2x Front Stabilizer / Sway Bar Link - K750155;1x Front Lower Control Arm + Ball Joint (Driver) - K621232;1x Front Lower Control Arm + Ball Joint (Passenger) - K621231;2x Rack and Pinion Tie Rod Boot & Bellows w/locking c-clamps
  • High Quality: Polishing and rust prevention; the anti-corrosion coating on the control arm can prolong the service life. All materials used for the control arm coating are environmentally friendly
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20132008 - 20112008 - 20112014 - 20172014 - 20172014 - 20172009 - 20172009 - 20172009 - 201620172011 - 20162010 - 201320162007 - 20162007 - 201620172007 - 20102007 - 2010
MakeBuickBuickBuickBuickBuickBuickChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCSaturnSaturn
ModelEnclaveEnclaveEnclaveEnclaveEnclaveEnclaveTraverseTraverseTraverseTraverseAcadiaAcadiaAcadiaAcadiaAcadiaAcadia LimitedOutlookOutlook
TrimBaseCXCXLConvenienceLeatherPremiumLSLTLTZPremierDenaliSLSLSLESLTBaseXEXR
Engine3.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V6
Note------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Brad_AutoParts_515

11/22/2025

Incredibly fast shipping on this suspension kit. Everything fit perfectly on my Acadia and the installation went smoothly. Highly recommend for a quick fix.

Amanda_MomOfThree_77

01/24/2026

My Traverse was feeling very loose and unsettled. After putting this kit on, it feels tight and secure again. Handling is way better, and the ride is much smoother.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.