PHILTOP 10pcs Front Lower Control Arms w/Ball Joints Sway Bar End Links Tie Rods Ends Suspension Kit for Mazda 3 2004-2009, 3 Sp

PHILTOP 10pcs Front Lower Control Arms w/Ball Joints Sway Bar End Links Tie Rods Ends Suspension Kit for Mazda 3 2004-2009, 3 Sp

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.2

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9747OCA230BUS

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Control Arm and Ball Joint (Driver) - K622045 1x Front Lower Control Arm and Ball Joint (Passenger) - K622046
Quantity
2
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
Part Number
K622045,K622046

Highlights

  • #47,810 in Automotive (See Top 100 in Automotive)
  • #92 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Front Lower Control Arms for 3 2004-2009, 5 2006-2010, 5 2012-2014.
  • Package Contents: 1x Front Lower Left Control Arm + Ball Joint; 1x Front Lower Right Control Arm + Ball Joint; 2x Front Left & Right Sway Bar End Links; 2x Rear Left & Right Sway Bar End Links; 1x Front Right Outer Tie Rod End; 1x Front Left Outer Tie Rod End; 2x Front Inner Tie Rod Ends.
  • Tips: Please check that the control arm is suitable for your vehicle by "Suncentautoconfirmedfit" before purchasing.
  • Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life.
  • Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20132009 - 2013
MakeMazdaMazda
Model66
TrimSi
Engine3.7L V62.5L L4
Note--

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.2/5

Based on 5 reviews

540%
440%
320%
20%
10%

Steve_DIYer_476

03/09/2026

Super impressed with how quickly this arrived. Everything was well-packaged and ready to go. Installation was a snap, no problems whatsoever. Glad I chose this kit.

Tom_Handy_656

10/16/2025

Seriously impressed with the craftsmanship for this price point. It feels like I got a much more expensive kit. My Mazda 3 rides like new again, and it was a fraction of the cost of OEM parts.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.

PHILTOP 10pcs Front Lower Control Arms w/Ball Joints Sway Bar End Links Tie Rods Ends Suspension Kit for Mazda 3 2004-2009, 3 Sp