PHILTOP 10pcs Front Suspension Kit Fit Camry 2002-2003, Highlander 2004-2007, RX350 2007-2009, RX330 2004-2006, Solara 2004-2008

PHILTOP 10pcs Front Suspension Kit Fit Camry 2002-2003, Highlander 2004-2007, RX350 2007-2009, RX330 2004-2006, Solara 2004-2008

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3349CAK0508US

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Right Control Arm - (Passenger) - K642725 1x Front Lower Left Control Arm - (Driver) - K642726 1x Front Lower Left Ball Joint - K90346 1x Front Lower Right Ball Joint - K90347 2x Front Sway Bar End Link - K90344 2x Front Inner Tie Rod End - EV420 1x Front Driver Side Outer Tie Rod End - ES3601 1x Front Passenger Side Outer Tie Rod End - ES3600
Quantity
10
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
4806906070,4806933050,4806906080,4806906100,4806933060,4806928120,4806958010,4806906140,4806906180,4334009010S1,4333009010,4806806070,4882006040,4882028050,4334009010,4806906150,4806806100,4334009080,4334029175,4333029405,4333009560,4333009160,4334029215,4333029615,4547029185,4547039215,4550339225,4550309230,480690E010,4546039615,480680E010,4546029425
Part Number
K90344,K90346,K90347,EV420,RK620333,RK620334,ES3600,ES3601,MK90344,MK90346,MK90347,ES3652,4547009010,TC1513,4546009010,TC1515,MEV420,TC8135,MES3601,MES3600,ES3648,TC1514,GS20246,GK90347,GK90346,527004,527003,GK90344,CB74204PR,CB74203,CB74203PR,CA74414,CA74414PR,524154,B90346XL,B90347XL,SK90344XL,K200041,TYF608,TYF606,TYL611,JBU866

Highlights

  • #63,784 in Automotive (See Top 100 in Automotive)
  • #138 in Automotive Replacement Control Arms
  • Fitment: PHILTOP Front Control Arms Fit for Camry 2002 2003, ES300 2002 2003.OE NUMBER: K620334 K620333 K90346 K90347 EV420 ES3600 ES3601 K90344.
  • Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life.
  • Tips: Please confirm the matching in "confirmed it" to confirm whether the parts are suitable for your vehicle application. If you have any questions about the control arms, please feel free to contact us. We will respond to your questions within 24 hours.
  • Perfect Performance: The new control arm reduces wheel vibration and reduces noise from excessive wear while driving.
  • Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20032002 - 20032002 - 20032002 - 20032002 - 20032002 - 20032002 - 2003
MakeLexusToyotaToyotaToyotaToyotaToyotaToyota
ModelES300CamryCamryCamryCamryCamryCamry
TrimBaseLELESESEXLEXLE
Engine3.0L V62.4L L43.0L V62.4L L43.0L V62.4L L43.0L V6
Note-------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.6/5

Based on 10 reviews

570%
420%
310%
20%
10%

robert kim

11/26/2024

Verified buyer

I recently installed the PHILTOP Front Control Arms on my Camry and the difference is night and day. These control arms have significantly reduced wheel vibration and road noise, making for a smoother and quieter ride. The quality of the product is top-notch, with heat-treated components that promise a long service life. Installation was a breeze, and the customer service was responsive to my inquiries. Highly recommend for anyone looking to upgrade their suspension system. Read more

Tom_Handy_883

04/24/2026

Excellent quality for the price. They look and feel very durable, just like the factory parts but cheaper. My RX330 feels so much more stable and safe now.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.