PHILTOP 12Pcs Front Control Arms w/Ball Joint & Sway Bar End Links & Inner Outer Tie Rods for 2008-2012 Liberty, 2007-20

PHILTOP 12Pcs Front Control Arms w/Ball Joint & Sway Bar End Links & Inner Outer Tie Rods for 2008-2012 Liberty, 2007-20

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8942CAK3743US

Specifications

Brand
PHILTOP
Items Included
1x Front Upper Control Arm + Ball Joint (Driver Side) - K621564 1x Front Upper Control Arm + Ball Joint (Passenger Side) - K621565 1x Front Outer Tie Rod End (Driver Side) - ES800413 1x Front Outer Tie Rod End (Passenger Side) - ES800412 2x Front Lower Ball Joints - K80629 2x Front Sway Bar End Links - K750127 2x Inner Tie Rod Ends - EV800416 2x Rack & Pinion Tie Rod Boots
Quantity
12
Position
Front Upper
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
5135651AA,68029024AA,52125295AB,5135651AD,5135651AC,5135651AB,52125113AE,52125112AE,5135651AE,6507275AA,52125295AC,52125367AA,52125366AA,52125113AD,52125112AD,52109970AA,52125112AB,52125113AB
Part Number
K80629,EV800416,K750127,ES800413,ES800412,RK621564,RK621565,MK80629,TC5997,TC5076,TC5996,TC5694,GS251042,GS251043,GK80629,BJ96135XL,CB81137PR,CB81138PR,GS25822

Highlights

  • #22,809 in Automotive (See Top 100 in Automotive)
  • #43 in Automotive Replacement Control Arms
  • Confirmed Fit: Compatiable with Liberty 2008-2012, Nitro 2007-2011
  • Kit Includes: 1x Front Upper Control Arm + Ball Joint (Driver side) - K621564, 1x Front Upper Control Arm + Ball Joint (Passenger Side) - K621565, 1x Front Outer Tie Rod End (Driver Side) - ES800413, 1x Front Outer Tie Rod End (Passenger Side) - ES800412, 2x Front Lower Ball Joints - K80629, 2x Front Sway Bar End Links - K750127, 2x Inner Tie Rod Ends - EV800416, 2x Rack & Pinion Tie Rod Boots
  • Superior Quality: Coating with corrosion protection and promoting a longer service life, effectively help reducing the road noise and vibration. The high-strength steel body makes it more stable
  • Long Service Life: Designed to handle severe impacts and repetitive loads through heat-treatment.Coatings to studs inhibit corrosion to promote a long service life
  • Easy to install: Excellent product design and manufacturing technology make PHILTOP control arms better fit your car and make your installation fast and simple

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20112010 - 20112010 - 20112007 - 20092009 - 20112007 - 20092007 - 20082010 - 20112010 - 20112010 - 201120122008 - 20122010 - 20112008 - 2012
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeJeepJeepJeepJeep
ModelNitroNitroNitroNitroNitroNitroNitroNitroNitroNitroLibertyLibertyLibertyLiberty
TrimDetonatorHeatHeatR/TSESLTSXTSXTSXTShockJetLimitedRenegadeSport
Engine4.0L V63.7L V64.0L V64.0L V63.7L V63.7L V63.7L V63.7L V64.0L V64.0L V63.7L V63.7L V63.7L V63.7L V6
Note--------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Jennifer_Auto_329

04/04/2026

This kit completely transformed the handling of my Liberty. No more loose steering or uneven tire wear. It feels tight and responsive, like it should. Highly recommend this kit.

Jason_Trucks_232

10/30/2025

Got the whole front end done with this kit. Everything arrived fast and was well-organized. Installation was surprisingly easy, and all the parts fit perfectly. My Liberty feels solid again.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.